Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Rear Rocker Panel Support
Posted by: jim_hoyland Aug 18 2008, 10:37 AM
There is a support to the rocker panel top just in front of the trailing arm. Mine has broken away. It's a tricky area to get to anyway, has anyone done this repair ?
There was a screw holding the strap to the rocker edge, but the hole gave way and there is little to grab onto.
Posted by: roadster fan Aug 18 2008, 12:45 PM
I havent done the repair but I have removed mine while I install GT flares. It is welded from the factory, but I guess if you dont/cant weld it you could use a rivet or two for a semi-permanent repair.
You say there isnt much to grab onto, so welding is probably best.
Jim
Oh, and before someone else says it 
Posted by: jim_hoyland Aug 18 2008, 01:24 PM
I'll shoot a pic--it's such a tight spot, I don't think it will show much.
I havent done the repair but I have removed mine while I install GT flares. It is welded from the factory, but I guess if you dont/cant weld it you could use a rivet or two for a semi-permanent repair.
You say there isnt much to grab onto, so welding is probably best.
Jim
Oh, and before someone else says it
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)