Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Heater Flapper Valves

Posted by: jim_hoyland Aug 20 2008, 04:15 PM

How do the aftermarket Dansk flapper valves differ from the OEMs ?

Posted by: dr914@autoatlanta.com Aug 20 2008, 04:40 PM

QUOTE(jim_hoyland @ Aug 20 2008, 03:15 PM)

How do the aftermarket Dansk flapper valves differ from the OEMs ?

yup

Posted by: rhodyguy Aug 20 2008, 05:04 PM

how so?

Posted by: r_towle Aug 20 2008, 05:18 PM

The Dansk one probably seal correctly...

Posted by: dr914@autoatlanta.com Aug 20 2008, 05:20 PM

QUOTE(rhodyguy @ Aug 20 2008, 04:04 PM)

how so?

the angle of the outlet

Posted by: Racer Chris Aug 20 2008, 05:33 PM

This picture shows the different outlet angles.

Attached image(s)

Posted by: jim_hoyland Aug 20 2008, 08:21 PM

Nice picture Chris, thanks for posting it. Does the Dansk fit with the different outlet angle ? Do the control arms point correctly ?

Posted by: Racer Chris Aug 21 2008, 09:10 AM

I haven't used them in a stock installation, so I can't say for sure but, I think the flex hose will just have a little extra bend in it and the arm is close enough to the correct angle to function properly. The cable may not be long enough as is, but that is simple enough to extend.