Take a look at what I found on German Ebay. Most of the system looks like it is there.
I would like to get it but not sure 250euro is a good price.
http://cgi.ebay.de/VW-Porsche-914-914-4-914-6-Scheinwerferwaschanlage_W0QQitemZ140263541397QQcmdZViewItem?hash=item140263541397&_trkparms=39%3A1|66%3A2|65%3A10|240%3A1318&_trksid=p3286.c0.m14
If you want to be stock then the price is fine, probably. If you want a system to do the same thing, you could assemble one for less.
That is a huge jump in price over the last offering; what happened I wonder.
http://cgi.ebay.at/ws/eBayISAPI.dll?ViewItem&rd=1&item=140258827595&ssPageName=STRK:MEWA:IT&ih=004
Missing the bumper and bumper top, both major items.
I have a brand new bumper top for those squirters. The rubber is cut out for the squirters to recess in to the metal support. (The p.o. lost the squirters!!!). I assume the only difference in the bumpers are some holes for the hoses, is that correct?
Bumper has a special tab welded in place for the squirter to mount to. Squirters are NLA for quite some time.
Couple of threads on the headlight washer system:
http://www.914world.com/bbs2/index.php?showtopic=82677
http://www.914world.com/bbs2/index.php?showtopic=84093
Mark, do you have a photo of the 74 and earlier bumper with the squirter holes? I was just going to modify my new painted bumper. I thought there was just some holes, but if I need to add a bracket, then that is extra effort.
Also, the tank needs to have a tie down strap. Probably a rubber strap with fittings on the ends. I don't know if there are tabs welded to the body to attach to, or if I just need to drill holes for screws. I'd assume that there would be welded tabs since drilling holes just asks for problems.
I'd really like to see photos from a factory fitted system.
Dave,
Look at page 12 of the 75 dealer service and info manual. Bottom picture has + type bracket. I will checked in the factory manual(Book 8 Body) about the earlier version but it shows nothing about either version. I have seen the picture some where before but I cannot remember. I went back and looked at the 1st thread and realized that is where I had seen the bumper top.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)