Posted by: germaneighter Sep 17 2008, 05:53 PM
What are the best plug wires?
dg
Posted by: ArtechnikA Sep 17 2008, 06:56 PM
QUOTE(germaneighter @ Sep 17 2008, 07:53 PM)
What are the best plug wires?
a quick search here on Magnecore will show you ;-)
Is this for a T-IV, a flat-6, a Chevy, or what?
I still think the answer is Magnecore, but give us a little more to go on...
Posted by: sww914 Sep 17 2008, 08:01 PM
I agree, Magnecors are a good value.
Posted by: blitZ Sep 17 2008, 08:05 PM
I've had the Magnacore and Beru. I like the Beru better. I had some funky missing full throttle in 5th at 4k plus rpm, never could nail down the problem. Once I switched to the Berus it was gone.
Posted by: ArtechnikA Sep 17 2008, 08:10 PM
QUOTE(blitZ @ Sep 17 2008, 10:05 PM)
I've had the Magnacore and Beru. I like the Beru better.
This is why the application is important.
one thing I like about the Magnecore for /6 applications is that the connectors and air seals fit, work, and don't embrittle like the German rubber seems to. But I've never used them on a T-IV, so I can't tell what those'd be like. I assume they're different between the 2,0 and the others...
I need a set of wires for the Subie and I'll try a set of Magnecore's there. I'd be astonished if there were Subie Beru's ;-)
Posted by: SGB Sep 17 2008, 08:18 PM
Magnacores did NOT work well for me either. They would not connect securely to the plug. I'm back to good ol Bosch, but I should try the Beru ones.
Posted by: germaneighter Sep 17 2008, 08:49 PM
4 cyl 2.0
stock F.I.
Crane Ignition Conversion
QUOTE(ArtechnikA @ Sep 17 2008, 04:56 PM)
QUOTE(germaneighter @ Sep 17 2008, 07:53 PM)
What are the best plug wires?
a quick search here on Magnecore will show you ;-)
Is this for a T-IV, a flat-6, a Chevy, or what?
I still think the answer is Magnecore, but give us a little more to go on...
Posted by: germaneighter Sep 17 2008, 09:52 PM
Where is best (mail order) place to get Magnacore and/or Beru?
Posted by: SGB Sep 17 2008, 10:24 PM
I'm always satisfied with Pelican parts.
Posted by: blitZ Sep 18 2008, 06:40 AM
QUOTE(germaneighter @ Sep 17 2008, 11:52 PM)
Where is best (mail order) place to get Magnacore and/or Beru?
I have the exact same setup as you and used these wires.
http://www.paragon-products.com/product_p/kb_09-380.htm
Posted by: charliew Sep 18 2008, 10:50 AM
You might check with lowbudget.com, AJ Simms, he's pretty straight and has the best quality parts for good prices. I know he has the type 1 wires not sure about type 4.