Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Questions for the pros

Posted by: LeNoah Oct 3 2008, 05:14 PM

A couple quick qustions for you seasoned teeners from a newbie.

I changed out the broken ext door handles and put in the old lock cylinders. All works fine but there is a small, very thin bushing/washer that goes around the cylinder bfore it goes back into the mechanism. Everyone I have seen falls apart in pieces when the cylinder is removed. Is there any source for that part? Or a substitute/work around?

Headlights work in low beam but go dark when I hit high beams. New bulbs? A relay? Switch? Can I buy a pair of halogens (lots of 'em on ebay) and just plug & play or do they require other mods?

Thanks for the help.

LN

Posted by: ws91420 Oct 3 2008, 05:21 PM

Check Pelican or Auto Atlanta for the bushing. For the lights check fuses first, then relays. H6054 bulbs will hook up fine.

Posted by: SGB Oct 3 2008, 09:55 PM

I dunno about the lock cylinders thing. The headlight thing is almost certainly a bad high beam relay, under the dash to the left of the steering wheel, on the side of the fuse panel. I

Posted by: dbgriffith75 Oct 4 2008, 06:32 AM

1.Remove the lock cylinder and handle entirely and just use a screwdriver to open your door.
2. Secure LED MAG lights to your hood with duct tape.

Problems solved. ;D