Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Seatbelt hardware help...
Posted by: Twise Oct 9 2008, 12:43 PM
Okay, below is what I got for hardware. Someone gimme the recipe. Thanks...
The long bolts seem to be too long for the b-pillar attach point, but honestly I can't remember....
IE:
A+2+Belt+3+1+4 = Bpillar
C+6+Belt = Firewall
B+5+Belt = Rocker
This is what I thought - am I right???
Posted by: dr914@autoatlanta.com Oct 9 2008, 12:58 PM
a upper bolt at roll bar bolster
b lower bolt at rocker panel
c bolt for retractor into firewall
1 spacer for upper in bolster
2 either side of upper seatbelt loop at bolster
3 either side of upper seatbelt loop at bolster
4 rocker to seatbelt
5 upper washer against bolster after spacer
6 used under "c" bolt
QUOTE(Twise @ Oct 9 2008, 11:43 AM) 
Okay, below is what I got for hardware. Someone gimme the recipe. Thanks...
The long bolts seem to be too long for the b-pillar attach point, but honestly I can't remember....
IE:
A+2+Belt+3+1+4 = Bpillar
C+6+Belt = Firewall
B+5+Belt = Rocker
This is what I thought - am I right???
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)