Check this out- a somewhat tired looking but complete running -6 that appears to be a euro model. I e-mailed him for the VIN to be sure it's real. $3500 is not bad to start, although you never know what the rust report will say...http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2459315106&category=6430
It seems to have a monza-type muffler.....
kim.
Looks like it's got plenty of rust too...
seller says the vin is 9140403676
I think it is worthy of restoration. If I had money/space/time...
B
I have emailed the owner for an appointment to see the car....I'm a hour away...
I also emailed them for the VIN...got it this AM...may have transposed 2 digits...but if I get to go look...I'll give full report...rust also. Anyone else in the St Louis area want to join me? The more eyes.... the better. I believe these people are used car dealers...month ago they were advertising a 924...and I inquired about it...I think I got a reply from the same email address...we shall see...
Will let all know...
Rich,
I will take digitals of the car...anyone have any area they especially want to see?...besides the obvious ones???
Ed
Hey Rich....why haven't you written all 50 states DMV's to see if that VIN is regsitered anywhere?
we'll have to wait and see where the proxy bids go in 6 days and 4 hours. for west coast guys the irish green car jim chambers has/had is a more attractive car.
kevin
Hey eresener,
A couple things to check for in identifying if it's a Euro car.I got one,it's #841
1.It won't have any door jam sticker,they didn't come w/any.
2.It have a serial#on the windshield post either.
3.The rear 914/6 emblem is correct on the rear.Look and see if the rear wasn't re-drilled for it.
4.Make sure there are bulbs in the lower turn signal assy's.
5.Metric speedo
6.Euro's didn't have side marker lights.Look behind the front wheels to make sure they don'thave any holes bondo'd up.
7.Look under the engine lid at all the foil information decals.They should all be written in German,no English.
8.If he's got a battery,pull the headlight switch to parking lights.The lights should pop up and parking lights come on.
Just a thought.
Ron
I got some additional pics from the seller. Check out the link and view all of the pics with a prefix of http://users.frii.com/mikeginter/ek_1.jpg through ek_8.jpg
http://users.frii.com/mikeginter/
okay - it's got the right tach, ignition on left, and a hand throttle - looks like a /6. there must be some reason there are no engine or rear-view pictures. i couldn't get much else out of those photographs... basketweave seat upholstery - hmm - mine had corduroy; couldda been an option i s'pose ...
It's got some serious rust.
Ron,...TIA for the tips...will take a list with me...
Gint...my pics will be much better...and I did look at all of his...
Rich...will describe as best as possible
should get answer re appointment sometime today...will let you all know...
ED
I forgot to add...this is the response to my inquiry re the VIN number...
HI THE VIN IS 9140403676
AIMS001
What is the AIMS001?
Ed
Looking forward to hearing your report and seeing some decent pics Ed. Thanks.
AIMs001 is the seller's ebay ID.
GInt,
I hope that this isn't indicitative of my observations...I must really be blind...but the camera never blinks....
Ed
Shameless promotion: Kevin is right. The six I have is about as ugly but far less rusty. It is for sale. Also have a pretty nice driver six that is going on the block soon. Yes, I did it, bought an old 911. Still have my 914-4 though so I can stay on this board and have something to drive to West Coast Classic.
It's up over $5 large. I wonder if anyone else has looked at it in person. Can't wait to hear what the story is.
Well...here is my report on this car...owner did not return my email for appointment...and the car was sold prior to end of auction...wonder why he didn't want anyone to see it...the purchaser had no feedback...hope he was able to see what he got...
Ed
Now that just plain sucks.
Bump for rdauenhauer.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)