Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Headlights High beam problem

Posted by: jc914 Nov 5 2008, 12:03 PM

My head lights work perfectly on the low beam. When i switch to high beam they work but when i hit a nice bump on the road they turn off. Then to turn them back on to high beam i just have to switch it on again. any thoughts of WHAT MAY CAUSE THIS???????

Posted by: 904svo Nov 5 2008, 01:44 PM

Dirty contacts on the light relay or a bad relay (Combination relay).

Posted by: jc914 Nov 5 2008, 04:07 PM

Thanks i am going to look at the relay tonight.

Posted by: Dr Evil Nov 5 2008, 04:10 PM

Dirty or loose fuses. High beams are on a separate fuse.

Posted by: jc914 Nov 6 2008, 07:24 AM

Thanks i confirmed it last night it is a loose fuse going to fix today.

THANKS

Posted by: orange914 Nov 6 2008, 02:51 PM

QUOTE(jc914 @ Nov 6 2008, 06:24 AM)

Thanks i confirmed it last night it is a loose fuse going to fix today.

THANKS

if it still persist make sure you have a good or even redundant ground. i wonder how the fuse(s) could be suspect as there are 2 fuses that operate both high beams... one left high beam and one right high beam.