Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Power Brake Bleeder

Posted by: t collins Nov 16 2008, 12:44 PM

Can anyone tell me the recommended operating pressure for the Motive Power Brake Bleeder?
Thanks,

Posted by: jc914 Nov 16 2008, 01:14 PM

I used the power bleeder for the first time about a month ago. The pressure I used was 10psi it worked perfect. Good luck. it is not that hard to do.

here is the link to my thread

http://www.914world.com/bbs2/index.php?showtopic=88223&hl=power+Bleeder

Posted by: t collins Nov 16 2008, 02:45 PM

Thanks for the info. I made a pressure bleeder using a one gallon garden spray, 3/16" clear hose, and an old 914 brake fluid res. cap and I didn't want to over the pressure the system and icon8.gif brake fluid all over the place.

QUOTE(jc914 @ Nov 16 2008, 11:14 AM) *

I used the power bleeder for the first time about a month ago. The pressure I used was 10psi it worked perfect. Good luck. it is not that hard to do.

here is the link to my thread

http://www.914world.com/bbs2/index.php?showtopic=88223&hl=power+Bleeder


Posted by: Vacca Rabite Nov 16 2008, 06:06 PM

I operate mine at 10 - 12 psi. More then that I am am worried about bursting something.

Also, if you have a pressure bleeder, you can't use speed bleeder nipples. Well, you can, but they negate the pressure bleeder.

Zach

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)