Group buy is $39.95 for the gauge shipped within the USA. Please see my last post for details.
Here is the link to the gauge:
http://www.mainelycustombydesign.com/engine_components.html#dipstick
I am not sure how many would want these, and how much they'd go for, but I figure we can save a few $$s.
So let me know if you are interested, how many and at what price, shipped would be a good deal and I'll see what I can set up.
Thanks!
I'm interested!
Im interested.
Rich
Interested for one
We ain't gonna get it done with just three.
Anyone else?
I'd be down.
Possibly (1) ... depends on the final 'discounted' cost
Depends on the discounted price. This is one of those things that would be nice, but not needed (for me).
Zach
I doubt they'll discount it much, but WDIK? I kind of want one anyway (for a long time now actually), so what the hell, I'm in for one.
Prob interested, depends on discount
:wallet:
Does it come with a camera and monitor so I can see it from the cockpit?
in, depending on price
I'm in . . . .
I'll let this run through the weekend. Monday, I'll take a tally and get back to Mainely and see what they say.
they often ebay the gauges at $45 bid and $49 buy it now.
What the heck, I'm in for one.
reminder bump
Did you ever get/post a price, or is the deadline for gauging interest only? I am interested, depending upon the price, but I'm not "in" until I know what your price will be.
My thanks and good luck!
Eric Read
Price TBD pending the number of participants. I am gauging interest for the gauge.
I'll call him tomorrow and say "I have X that are interested, depending on the final shipped cost. What can you do for us?"
That's the plan right now.
He is an hour or two from my house if shipping becomes an issue.
PM me if you need a friendly option on shipping.
Rich
Bob at Mainely has the following offer:
$39.95 each which includes USPS shipping to USA (I believe that includes AK & HI). The catch is that he wants it as one payment, and he'll do the shipping.
He has 15 ready to go, and will need some time to make more.
I could collect the $$, but I will need at assess the paypal fees to those that paypal it to me. I dunno what that %% is, so I need to look that up.
Still game? Let me know.
Agreed. How?
I'm still in.
I'm in. Paypal or check?
Mike
I forgot to tell you yesterday ... I'm in for ONE
Do you know what the difference is between the 912 and 914 gauges?
The rod length? and oil level markings on the rod?
Id like to get one I can use on either engine
Sorry it took so long to update. Here's the list of people that said that they are interested
1 kaptkaos - confirmed
2 edrotol - confirmed
3 SGB - confirmed
4 euro911 - confirmed (let me know f you want a 912 one too)
5 jeeperjohn56 - confrmed
6 914runnow - confirmed
7 fitzm1 - confirmed
8 Vacca Rabite - confirmed
9 Gint - confirmed
Pending:
Thisthreadisworthlesswthoutpcs
arvcube
anderssj
Garold Shaffer
ericread
type11969
Wertygrog
r_towle
Here is the deal. Bob is asking for 1 payment, which I can make for the full amount. We need 15 to qualify.
The cost is $39.95 each which includes shipping. If you want to send me a check, PM me and I will send you the details.
If you want to paypal me, you need to cover the paypal fees. Per the site http://ppcalc.com/ which calculates paypal fees, you will need to paypal me $41.45. Send me a PM and I'll send you my paypal address.
You will need to send me your shipping information via PM please.
We need 6 more people to qualify, so if you know that guys that expressed interest, nudge them.
Thanks all!!
PM sent with details.
I also notified the local gang about the buy and gave them a link to this thread.
Joe, I,m in for one, PM me with your address and I'll send a check Monday .. the check will have my " ship to" on it. Al Meredith
I'm in
PM me your paypal info.
Ok I'm in. We're waiting to confirm the 15 before sending you payment, yeah?
Please put me down for one Joe. I will put it to good use!
Sorry for the delay--I'm still in if you have room for one more. I can paypal, USPS Money Order, whatever . . . .
Thanks!
Steve A-
Need your email address to send paypal payment.
Mike Fitzgerald
79 Eastside Drive
Ballston Lake, NY 12019
Thanks
Mike
Brain Fart
That was supposed to be a PM.
I'm in if you are still taking orders. I'll PM you my info and will paypay you when I hear back.
Sorry, but I'm out on this one. Too many irons in the fire right now.
My thanks,
Eric Read
PM sent.
And BUMP. We need a few more buyers!
Ok - I sent out a PM to all people that confirmed, PM me, etc... If you haven't gotten the instructions, please PM.
We have 19 so far, and that may go up or down some. Bob said he had 15 ready to go, so there may be a slight wait for a few of them.
Thanks for participating!! I will post status in a few days. Unfortunately, I have jury duty. YECH!
Paypal and PM sent!
Mike
Can I still get in on the action?
Paid in Full
...
Joe,
Paypal sent . . . Merry Christmas to me and to you too
Paypal sent. Thanks for the work you've put into this Joe.
Thanks all. I think we've got 15 or a few more.
I tried calling Mainely today, and got a "number cannot be reached at this time" message. Likely some nasty weather up there. I sent an email to Bob and I will update here as well. Likely, I will get the payment and shipping info to him next week.
Thanks again!
Any news?
Zach
I never did send a payment.... I was waiting for a PM. Had the order ever been paid for yet? I know I'm a slacker but can I weasel in, last minute like?
Last call. Anyone that wants in needs to PM me and I will send the details.
I'll send you another PM Johnnie5.
The order should go out Monday (crosses fingers). How long it takes to ship from Mainely, I am not sure, but I will post back on that.
Thanks for your patience.
Can I still get in?
Paypal sent
We have one last straggler that I got the OK from Bob to fulfill this morning.
As soon as I get his payment, I will be sending out the complete order to Bob. He already has all of the shipping info, etc... He just needs the check now.
Thanks to all and for your patience. I will update as I get shipping info.
Thanks,
Joe
thanks to you, Joe.
Any news yet?
Payment was mailed this week. Damn paypal took 4 days to transfer I mailed it with tracking, etc.. thru USPS.
Once I know Bob has received it, I will ask him for shipping status.
Thanks to all that participated and please let me know when you get yours.
Is it drop shipping from vendor?
Bob will be sending them out directly to the members of the group buy.
Sweet. Thanks again for putting this together Kaptain!
Yes, thanks Joe
I think Bob will be shipping mine to you, ... right?
O.T. The 'bolt buster' set was on sale at SEARS ... $49.99 $35.00
thanks for organizing this kapt!
Bob got the check today.
Seems he has 2 mailing addresses, one being a PO Box. Given that it's -10 there, he doesn't go to the Post Office all that often to check the PO Box, which was where I sent it.
Bob said that he would ship them out tomorrow. When we negotiated the deal, he said he'd ship them via USPS Priority Mail. I will confirm this.
Please send me a PM to confirm the receipt of your unit.
Thanks!!
Excellent. Thanks El Kaosian
Got mine this morning. Thanks. I stuck it in my boiling tea kettle ..reads 212.
Al Meredith
I got mine this afternoon. Fits a bit loosely in the car, but not to the point where it will be a problem. Good deal!!
Mike
Rolled in today. Thanks for putting this together Joe.
Cool. The mail lady dropped this off a couple of hours ago. It's been sitting on the living room chair. I pulled it out of the box and looked at the dial. It says 68 or 69 (pretty small print). The thermostat is set at 68 degrees. Looks like it works pretty good at the low range.
Got mine today too....
Got mine today!
Thanks Joe!
Mike
got mine today too. thanks!
Mine came today, thanks for your efforts to put this together.
Hey Joe,
Mine got here today--looks great--it'll go in the car this weekend. Thanks for your efforts on this!
Best,
Steve A-
Received mine. Thanks again for organizing the group buy.
I got mine today too!
I ran it up to Pasadena this afternoon and my suspicions were confirmed. I'm running way too cool. Barely 200. I am running way rich as well, since I can smell gas in my oil, which isn't good.
Time to lean it out a bit and see how we do.
Got mine today. Realized that I need to modify the oil dipstick tube, as mine is curved and the Mainley gauge isn't. Its a "later" thing.
Zach
I received mine yesterday! Very cool to have! Thank you for putting this whole group buy together!
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)