Printable Version of Topic

Posted by: Vacca Rabite Dec 29 2008, 01:42 PM

As the title says.

Is there a gasket that I need to get before I bolt back up my axles to the transaxle flange?

is there anyhting that I need to refresh before I do this?

Zach

Posted by: Eric_Shea Dec 29 2008, 01:44 PM

Sure... CV Gasket goes there.

New bolts? New Schnorr washers for sure. I've got new bolts I can give you. Schnorr's are in stock as well. Let me know if you need a care package. Shipping will be more than the goodies.

Posted by: Vacca Rabite Dec 29 2008, 01:56 PM

Drat. I should have known.

I have new bolts and new schnorrs, but I do need gaskets. I'll send you a PM. Oh, I *still* have a box of calpiers to send you as cores. One of these days I'll remember to send it.

Zach

Posted by: Thomas J Bliznik Dec 29 2008, 01:56 PM

QUOTE(Eric_Shea @ Dec 29 2008, 11:44 AM)

Sure... CV Gasket goes there.

New bolts? New Schnorr washers for sure. I've got new bolts I can give you. Schnorr's are in stock as well. Let me know if you need a care package. Shipping will be more than the goodies.

Posted by: Cevan Dec 29 2008, 01:59 PM

Eric, are these the CV bolts that are drilled so they can be wired together?

Posted by: Vacca Rabite Dec 29 2008, 02:02 PM

Cevan, those are the DrEvil Safety Wire CV bolts.

Zach

Posted by: Eric_Shea Dec 29 2008, 02:08 PM

See Mikey for those.

These are just regular CV bolts. Nice thing about them is... they are standard hex, not 12 point.