I know this vendor has been talked about here before but I thought I'd give him a bump here.
I spoke to Jeff who does the layups himself a few weeks ago. He told me when I was ready to buy, give him a call and he would build some GT flared rockers for me. I told him they were going on a street car and he agreed to beef up the rockers at no charge (doubled the mat).
Well, I called him Monday to get him started and he told me he'd have them done today. I went out to his place in Hemet, CA today and couldn't be happier. The rockers came out very nice. He has a project 914 car in the shop that has his fiberglass fenders and decklids. Kinda nice since he can do fit checks on stuff like rockers when the come out of the mold. In all I saw 4 914's at his shop and he says he has 6 others at home. He also is getting into Boxster fiberglass production. He also does carbon fiber, saw a rear decklid in carbon that looked fantastic.
Also, I told him I wanted a flared front valance without the oil cooler cutout. He presently build the stocker valance in glass and a GT type. He agreed to piece together parts from each to do a custom valance for me w/o the oil cooler but with the flares. NO TOOLING OR SETUP CHARGES. I'll comment on that more when I receive it in a few weeks.
Anyway, I highly reccomend QRS fiberglass. Jeff's a super nice guy and very accomodating. See ebay for better photos.
Kev
Very cool! Website? Phone number?
I just ordered the whole shbang from these guys fenders,hood,trunk,bumpers,valence very nice and very light parts....I just wish the communcation was a little better but everything made it here.
I bought a set of decklids from them. I was quite impressed. Good bang for the buck.
He has a website now.
http://www.qrsfiberglass.com
I used all his parts for a 916 race car that I helped build. Drove to Hemet and personally met him and bought the parts. In fact when I mentioned the problem with the 916 front bumpers being all squished and out of shape he took one I had and made a correct mold and now produces a good front 916 bumper. Jim
LOVE the 914 he has on the wall!!
My Norton had no problem with it. It runs an active scan and cleans as I go.
I was having issues with internal links.
the 10jreen runs Jeff's deck lids. mine have a coromat center. they are firm, sandable and under 11 lbs. he said he coujld make lighter or stiffer street versions.
Jeff will make damn near any variation you can think of, just ask.
I have one of his front bumpers...good quality peice.
-Britain
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)