Looking for a 914 is a very risky business .
I'm wanting to learn how to remove rocker panels off potential cars I may be buying.
how do I identify badly rusted , longs or any other part on the car especially the Suspensions. how do i tell if they are all rusted to their core ???
Help me out , I don't want to get taken when I buy
Attached image(s)
Small screwdriver works. Poke and if it thin enough for you to make a hole, its bad
The rockers are originally rivited on from the factory (on the top, screwed in on the bottom). If they have never been removed before, the rivits would need to be drilled out for removal. Probably why the seller is not keen on the idea. It sounds to me like the seller is either not extremely motivated to sell or maybe hiding something.
From the factory it's screws and rivits. It is hard to see the worst area with the rockers on. This may just be me but if I was selling I would remove them with the understanding that the buyer would be responsable for putting them back on.
This might give you an idea where one weak (rusty) point is:
You could just remove the 3 screws and 2 bolts that hold the bottom of the rocker on and pull it away from the longitudinal. That should allow you to see behind there to some degree.
Sam,
Where in Monrovia are you and where is the car you are looking at? I'm in Pasadena and could offer my limited assistance. I'm going to Railroad Ave./Mytle for steel tubing and plate and to Buena Vista for O2 and Acetylene this Friday afternoon. I may do a quick run down to San Diego Saturday AM, but I should be free the rest of the long weekend. You can reach me at 818.298.9049.
Jens
TAKE HIM UP ON THE OFFER!
This is the way to evaluate a car. Have someone who knows what to look for take a look.
This may cost you a beer or two, but it is an excellent investment
I think that with some "Liquid Wrench", a couple pair of Knipex plyers, locking plyers, a long skinny flat screw driver, mirror and flashlight, it should be possible to get a really good idea of the state of the steel without upsetting the seller to much he he.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)