My 75 trip reset is hanging under the dash and doesn't have any kind of knob or end on it. It does function properly but it is just basically a threaded rod, hanging by the cable. Where is the stock mounting place for it and what type of knob/end does it have?
Lightly circled in pic
Attached image(s)
Spin it....
Grasp the cable between your thumb and forefinger...spin it like a pencil.
If the cable is seated in the back of the gauge AND the odometer still works, it will roll the 3 digits until they all hit equal numbers and eventually all zeros will turn up.
You used to have A/C. That is the extention you have circled. I can find no part # for the missing knob.
Steve
There's a mounting hole on the bottom of the dash under the cigarette lighter
thats where it mounts.
The extendtion mounts with a set screw and yes there is the original mounting hole you will see under the dash. Cut the extendtion short and use it has the knob and to hold it in its original mounting hole/bracket. Just a thought
Steve
My 75 has it sticking through the front of the dash to the right of the steering column. My car also had ac.
A/C was a dealer installed accesory. Therefore, how the "dealer" handled the trip odometer cable may vary.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)