914World.com [Powered by Invision Power Board]

Posted by: Dr Evil Feb 22 2009, 08:17 PM

I have a factory LSD box I am rebuilding and converting to side shift for a customer. The LSD may need a refresh, but I cant find any info on parts for the clutch disks. Anyone know of sources? Also, any links to info on rebuilding a LSD and adjusting the bias OR a place that will do it?

Posted by: Phoenix 914-6GT Feb 22 2009, 11:45 PM

Sorry, I know nothing. I'll give ya a bump though

popcorn[1].gif

Posted by: charliew Feb 23 2009, 12:05 AM

Mike there is a guy that does porsche and suby trannys and is really knowledgeable on early suby stuff named Matt Monson. I think he hangs out here and on nasioc for sure. He does it for a living so I'm not sure about a how to but maybe he can help on the parts.

Also check out redbeard he may know something he does 914 trannys. He's in houston.

Also there is a guy named Jay Stewart in CO. that does 901's and such. I found him on the samba I think.

Posted by: ChicagoPete Feb 23 2009, 09:18 AM

Carquip out in Colorado is probably an easy place to start...I know they do plenty of work on boxes and LSDs...

http://www.carquip.com/parts/914/index.asp

Peter

Posted by: sean_v8_914 Feb 23 2009, 10:26 AM

I dont know how to share teh whole thing

Attached File(s)
LSD_factory_man_old_format_word.doc ( 336.5k ) Number of downloads: 83

Posted by: Dr Evil Feb 23 2009, 02:29 PM

QUOTE(charliew @ Feb 23 2009, 01:05 AM)

Mike there is a guy that does porsche and suby trannys and is really knowledgeable on early suby stuff named Matt Monson. I think he hangs out here and on nasioc for sure. He does it for a living so I'm not sure about a how to but maybe he can help on the parts.

Also check out redbeard he may know something he does 914 trannys. He's in houston.

Also there is a guy named Jay Stewart in CO. that does 901's and such. I found him on the samba I think.

Ya, I know James (Redbeard), I was best man at his wedding

I didnt think about carquip....why, I dont know as I am dealing with them often enough.

I looked into Mittlemotor thinking that they would have it as they seem to have everything and no luck. Just a picture.

Posted by: ChicagoPete Feb 23 2009, 05:48 PM

QUOTE(Dr Evil @ Feb 23 2009, 12:29 PM)

I didnt think about carquip....why, I dont know as I am dealing with them often enough.

When I purchased my ZF from Carquip I recall having conversations about my application and what I wanted and I seem to remember that they actually built what I wanted from what they had around.

Peter

Posted by: ArtechnikA Feb 23 2009, 06:35 PM

Two more names are Steve Weiner at RennSportSystems and of course Paul Guard of Guard Gears.

Posted by: 904svo Feb 23 2009, 07:40 PM

Rebuilding LSD can be found in 914 manual Group3,
Final Drive Manual Transmission 914/6. Loacted near end
of group 3

Posted by: 904svo Feb 23 2009, 07:57 PM

lsd part numbers

Attached Image

Hope this helps you.

Posted by: charliew Feb 23 2009, 10:02 PM

I think Matt Monson was in colorado and may have worked at carquip and I think I read where he is doing his on thing now.

Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ LSD rebuilding