Has anyone had any experience with mounting a 914-4 motor
to a Volkswagen Bus transaxle?
Let me know,
Countryboy!
What year bus transaxle?
Bolts right up. Gotta replace the flywheel and clutch with a (tranny) year appropriate unit, and put a pilot bearing in the bore in the end of the crankshaft. If it's a reduction gear style trans, there are custom flywheels available.
The Cap'n, BTDT lotsa times
The transaxle is a 76 Type 2 Bus! What year do you think is best?
Countryboy
2.0 L Jet FI in a 73
Attached image(s)
76-79 091 bus tranny is nice, 228mm flywheel and you must use the proper year bus starter or it won't engage the teeth right. The 914 2.0l heads run hot in a bus and can crack..the extra hp is nice but watch out for running hot CHT's.
Thanks, Guys!
Keep the info coming!
CB!
Are you attempting to use a bus tranny in a 914, or a 914 motor in a bus?
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)