Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ headlight motors

Posted by: toon1 Mar 1 2009, 10:02 AM

I need to get them out to paint the front trunk.

Thank's, Keith

Posted by: jmill Mar 1 2009, 08:38 PM

You need to disconnect the bellcrank arm, the nut on the motor shaft and the 3 bolts on the motor housing . I gently smack the motor shaft with a plastic hammer and the motor pops out. You can pull out the relay and pull the rubber relay connection through. Disconnect the harness from the motor and your done.


Posted by: toon1 Mar 1 2009, 09:31 PM

Great! thank's, it was the relay portion that was confusing.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)