Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Big question for a small part
Posted by: computers4kids Mar 11 2009, 08:46 AM
I removed my aftermarket steering wheel and have a MOMO and 8002 adapter on the way. I don't seem to have a circlip on my steering shaft....how important is it? I presume I must have lost it when I replaced the bearing last time. If needed, will the ones at the hardware store work? Thanks
Here is a picture (not mine...but close enoug)
Posted by: charliew Mar 11 2009, 08:59 AM
I put the clip back on and the wheel wouldn't go all the way down far enough so I am not using it.
Sorry I went back and saw where you must mean the clip that holds the bearing in. I also noticed that you are using a vw bearing sleeve. On my 75 the metal bearing sleeve wasn't tight enough to keep the shaft from wiggling so I had to use the nylon factory sleeve as it is thicker.
Posted by: computers4kids Mar 11 2009, 04:53 PM
I put the clip back on and the wheel wouldn't go all the way down far enough so I am not using it.
Sorry I went back and saw where you must mean the clip that holds the bearing in. I also noticed that you are using a vw bearing sleeve. On my 75 the metal bearing sleeve wasn't tight enough to keep the shaft from wiggling so I had to use the nylon factory sleeve as it is thicker.
Actually, I do have the bearing clip, it's the clip closest to the steering wheel itself I was referring to. My adapter arrived today but no directions in the box. However, there is a not in the box that says "Warning" "Do not install without reading the instruction manual"
...must be made in china.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)