Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Smog Pump Help Needed
Posted by: Derek Seymour Mar 11 2009, 09:01 PM
Does the belt attach to the fan to pump or the alternator to pump?
If on the fan are there two grooves on the cooling fan, one for the alternator belt and one for the smog pump?
Or is there supposed to be a secondary pulley coming off the alternator shaft... if so I seem to be missing that.
Thanks for ANY help!!!!!!
Posted by: Cap'n Krusty Mar 11 2009, 09:31 PM
There's a secondary pulley assembly that comes off the crankshaft. It consists of a 3 point bracket and a pulley with a shaft that bolts to the fan hub through a rubber damper. NLA, but I have a couple of good used ones. The Cap'n
Posted by: Derek Seymour Mar 11 2009, 09:35 PM
There's a secondary pulley assembly that comes off the crankshaft. It consists of a 3 point bracket and a pulley with a shaft that bolts to the fan hub through a rubber damper. NLA, but I have a couple of good used ones. The Cap'n
AWESOME!!!! Could I buy one off of you? Looks like we are 30 minutes away would you be available this weekend, I could drive down and pick it up?
THANKS!!!!
Posted by: arvcube May 7 2009, 06:27 PM
There's a secondary pulley assembly that comes off the crankshaft. It consists of a 3 point bracket and a pulley with a shaft that bolts to the fan hub through a rubber damper. NLA, but I have a couple of good used ones. The Cap'n
could I get a pic of this assembly emailed to arvcube@aol.com or posted on this thread? do you still have any more of these?
thanks,
arvin
Posted by: ejm May 7 2009, 07:27 PM
I have a couple of these also.....
Attached image(s)
Posted by: arvcube May 7 2009, 10:05 PM
I have a couple of these also.....
thanks for the pic ejm. How much do you want for one shipped to 92064?
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)