Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Sway bar work and another great job by Eric Shea

Posted by: Phoenix 914-6GT Mar 11 2009, 09:53 PM

So I went through and redid my front area. Welded in the sway bar tabs, thanks Engman, and got everything lined up nicely so there is no binding at all. I then added a golf club sleeve so that if the gas tank ever drops onto the bar it will not have any rub.

Also installed my nicely refinished S calipers that Eric Shea went though for me . Nice work E doggy

Oh, and for those so worried about the overspray, those parts are being replaced anyway

Attached image(s)

Posted by: jaxdream Mar 11 2009, 10:01 PM

Those S's look great , almost makes me want to redo mine and run them instead of the A's I plan on using .Looks like you gettin it together !!!

Jaxdream

Posted by: biosurfer1 Mar 11 2009, 10:17 PM

Is that a stock bar?

Posted by: Chris Hamilton Mar 11 2009, 10:25 PM

QUOTE(biosurfer1 @ Mar 11 2009, 09:17 PM)

Is that a stock bar?

Looks like a Tarett bar: http://www.tarett.com/

Posted by: effutuo101 Mar 11 2009, 10:37 PM

Hey Jon, I found some high denisty foam. we could carve it down to the size you want. I will give you a ring tomorrow.

Posted by: Phoenix 914-6GT Mar 11 2009, 10:41 PM

Foam? What for?

Yes, it is a Tarret. I bought it before I knew about the Smart Racing bar Still a very nice bar and works very nice. The Smart racing sway bar is just a little nicer (and a little more $ )

Posted by: effutuo101 Mar 11 2009, 10:43 PM

tank pad

Posted by: Phoenix 914-6GT Mar 11 2009, 10:47 PM

Ah... okay Thanks Chris.

Posted by: Todd Enlund Mar 11 2009, 11:03 PM

QUOTE(Phoenix 914-6GT @ Mar 11 2009, 09:41 PM)

Foam? What for?

Yes, it is a Tarret. I bought it before I knew about the Smart Racing bar

Still a very nice bar and works very nice. The Smart racing sway bar is just a little nicer (and a little more $

)

You should get the Smart bar. I'll dispose of the Tarett for you.

Posted by: Phoenix 914-6GT Mar 11 2009, 11:28 PM

I may just do that in the future but for now I can't buy anything new

Maybe a bunch of clients with get a fire under their ass and start buying.

Posted by: Phoenix 914-6GT Mar 12 2009, 10:18 AM

I wonder if Eric has seen his nice work here yet . Maybe he forgot he did these since they were on my shelf for so long