Posted by: jcambo7 Apr 2 2009, 10:58 AM
So I am missing a lot of seat parts and I am wondering where I could buy some? Most of it is all the mounting hardware and stuff. Can't ever drive it without a bolted down seat.
Posted by: dr914@autoatlanta.com Apr 2 2009, 10:59 AM
QUOTE(jcambo7 @ Apr 2 2009, 09:58 AM)
So I am missing a lot of seat parts
and I am wondering where I could buy some? Most of it is all the mounting hardware and stuff. Can't ever drive it without a bolted down seat.
common stuff most of the usual suspects will stock it.
Posted by: jcambo7 Apr 2 2009, 11:02 AM
QUOTE(dr914@autoatlanta.com @ Apr 2 2009, 11:59 AM)
QUOTE(jcambo7 @ Apr 2 2009, 09:58 AM)
So I am missing a lot of seat parts
and I am wondering where I could buy some? Most of it is all the mounting hardware and stuff. Can't ever drive it without a bolted down seat.
common stuff most of the usual suspects will stock it.
So who would be the usual suspects?
Posted by: helios Apr 2 2009, 11:05 AM
QUOTE(jcambo7 @ Apr 2 2009, 10:02 AM)
So who would be the usual suspects?
Couple of the first places to check would be AA and Pelican Parts.
Posted by: jcambo7 Apr 2 2009, 11:08 AM
QUOTE(helios @ Apr 2 2009, 12:05 PM)
QUOTE(jcambo7 @ Apr 2 2009, 10:02 AM)
So who would be the usual suspects?
Couple of the first places to check would be AA and Pelican Parts.
I looked through pelican parts. They don't have mounting stuff. I will try AA. Thanks.
Posted by: Joe Sharp Apr 2 2009, 11:13 AM
Hey James, what are you missing?
Posted by: jcambo7 Apr 2 2009, 11:17 AM
QUOTE(Joe Sharp @ Apr 2 2009, 12:13 PM)
Hey James, what are you missing?
From this pic here r the numbers I am missing
6(only have #7 for drivers side and neither 6 or 7 for pass. side), most of 10,9, n 8 for both seats. And than also 11 for the passenger seat
Posted by: jd74914 Apr 2 2009, 11:25 AM
Well, 8/9/10 are just bolts and washers. You can get those at the hardware store. Someone around here will have the other parts. Don't buy them new from AA. IMHO that's a waste of money.
Posted by: type47 Apr 2 2009, 11:27 AM
8, 9 and 10 are probably common metric hardware and at this time without looking at the PET, it's a 6mm x ~25, a spring washer and a flat washer. the rail to the seat bottom is best bought used from someone here in the classified section. Post a W(ant)T(o)B(uy). Same with the 11.
Posted by: jcambo7 Apr 2 2009, 11:32 AM
QUOTE(type47 @ Apr 2 2009, 12:27 PM)
8, 9 and 10 are probably common metric hardware and at this time without looking at the PET, it's a 6mm x ~25, a spring washer and a flat washer. the rail to the seat bottom is best bought used from someone here in the classified section. Post a W(ant)T(o)B(uy). Same with the 11.
Thanks all for answering my questions.
Posted by: JWest Apr 2 2009, 11:40 AM
QUOTE(jcambo7 @ Apr 2 2009, 12:32 PM)
QUOTE(type47 @ Apr 2 2009, 12:27 PM)
8, 9 and 10 are probably common metric hardware and at this time without looking at the PET, it's a 6mm x ~25, a spring washer and a flat washer. the rail to the seat bottom is best bought used from someone here in the classified section. Post a W(ant)T(o)B(uy). Same with the 11.
Thanks all for answering my questions.
I've got bunch of the sliders - I can send you what you need.
Posted by: jcambo7 Apr 2 2009, 11:45 AM
QUOTE(JWest @ Apr 2 2009, 12:40 PM)
QUOTE(jcambo7 @ Apr 2 2009, 12:32 PM)
QUOTE(type47 @ Apr 2 2009, 12:27 PM)
8, 9 and 10 are probably common metric hardware and at this time without looking at the PET, it's a 6mm x ~25, a spring washer and a flat washer. the rail to the seat bottom is best bought used from someone here in the classified section. Post a W(ant)T(o)B(uy). Same with the 11.
Thanks all for answering my questions.
I've got bunch of the sliders - I can send you what you need.
Those r the rails right? I have one on the drivers seat right now. So I guess I need three. I will pm u my address.
Posted by: Joe Sharp Apr 2 2009, 11:48 AM
The allen head bolts for the seat tracks have a very short head. I have used other bolts and had the tracks stop before they slide all the way back.
Posted by: jcambo7 Apr 2 2009, 11:51 AM
QUOTE(Joe Sharp @ Apr 2 2009, 12:48 PM)
The allen head bolts for the seat tracks have a very short head. I have used other bolts and had the tracks stop before they slide all the way back.
hm...I c...
Posted by: Sleepin Apr 2 2009, 01:03 PM
I may have a passenger side seat track (11) laying around. I will look this weekend. PM me with your addy.
Posted by: jcambo7 Apr 2 2009, 01:09 PM
QUOTE(Sleepin @ Apr 2 2009, 02:03 PM)
I may have a passenger side seat track (11) laying around. I will look this weekend. PM me with your addy.
PM sent...thanks.