Printable Version of Topic

Posted by: Travis Neff Feb 26 2004, 08:28 PM

I have got some Welt bushings and at first glance they looked the same and I didn't think much until I saw part numbers.

MO2557
MO2558

Which ones are for the front of the front A-arms, and which is for the rear of the front A-arms? Also I did this order over the phone and I asked for street bushings, can anyone confirm by my part numbers above??

Posted by: Aaron Cox Feb 26 2004, 08:33 PM

i just had this exact problem! you order from PP? (they just put four in a sack)

anyway. one set is slightly larger outside diameter (.00X difference IIRC) i measured the housings, and one is .00X bigger than the other.

i believe xxxx7's were on the front. ill check for you tommorow

Posted by: Ira Ramin Feb 26 2004, 09:45 PM

I’m not sure about their numbering , but the front housings are about .020” larger than the rears.

Ira

Posted by: Aaron Cox Feb 26 2004, 09:53 PM

i concur with Ira.

Posted by: Brad Roberts Feb 26 2004, 10:09 PM

Ira.. I need a sway bar for a customers car and I might want one for stock.


B

Posted by: Ira Ramin Feb 26 2004, 11:19 PM

Got them in stock and can ship out in the morning if you want, although you guys are making a serious dent in my front swaybar supply. No complaints, just working hard to keep up these days. Thanks guys!! PM me with the details of what you need. U-brackets, nut plates, quantity, shipping address?

Thanks,
Ira

Posted by: Mueller Feb 27 2004, 12:34 AM

correctplacementforplasticbushings:


Attached image(s)

Posted by: fiid Feb 27 2004, 02:56 AM

What mueller said. Bushings suck. I have a set for sale if anyone wants them. Wait - busings rock man.....

not

Posted by: Travis Neff Feb 27 2004, 02:41 PM

BUMP... Didn't know Muellers industrial dildo needed bushings already..