My Renshift came today so I was anxious to get it installed, but I am having issues...I just can't get all the gears at the same time.
Before I started, I was able shift into all 5 gears and R very easily.
It seems I can only get
R, 1st, 2nd and 3rd (no 4th or 5th)
or
2nd, 3rd, 4th or 5th (no R or 1st).
There just doesn't seem like there is enough side to side movement to grab all the gears. I've tried numerous combinations of moving the rod different lengths inside the coupler and there is some side to side adjustment with the 3 upper bolts.
I initially placed the transmission in 2nd and set the coupler bolt and tried that as a starting point with no luck.
I'm wondering since the Renshift has a 20% side to side reduction if that could be part of the problem?
Also, I left the throw reduction at the bottom hole (20% reduction), how would the 33% throw affect my issue? It seems to me it shouldn't make any difference.
I'm sure my issue is due to user error, any ideas???
Did you make sure and install all new bushings before you put in the shifter, including firewall, coupler, transmission and the cup? If not that could be where the problem is.
Best way I found to install the Rennshift was to put it in third at the transmission and then take and tighten the shifter in the middle plane. That way you are really tightening it in third and then you will be able to get the other gears. Hope that works.
You have to remember the Rennshift has the springs that that return it to the 2-3 plain. I think I had to use a crows foot to reach the bolt to tighten it but it worked perfectly.
I always lock my transmission in third before connecting the linkage. Second would work just the same since the shifter should center in 2-3 gate, but you'll have more difficulty accessing the bolt at the coupler. The one nearest the shifter.
The 20% / 33% reduction should make things better. It's a 20% reduction in throw at the top of the shifter or in other words a 20% increase in throw at the bottom.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)