Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Fog light seals again?

Posted by: Qarl Feb 28 2004, 11:29 PM

If there is enough interest, I may consider doing another run of fog light seals.

Here are the specifics...

Porsche/Hella fog light reproduction seals as used on the 1970-1974 914 fog lamps and the 1969 to 1973 911 fog lamps (Hella 118s)

They fit the lenses snugly and are the proper color. They install in the light housings perfectly and will provide for a nice tight seal.

Price per set (pair) will be $10.00 (including S/H via USPS to U.S. residents). Additional sets are $9.00 per pair provided I ship them all to the same address.

Put your name here and the number of sets you would be interested in...


Attached image(s)
Attached Image

Posted by: bernbomb914 Feb 28 2004, 11:35 PM

I am still interested in one set
Bernie

Posted by: lagunero Feb 29 2004, 01:28 AM

I'm in for two.

Posted by: Rgreen914 Feb 29 2004, 01:31 AM

Me too, TWO...sets that is!

Posted by: Qarl Feb 29 2004, 11:07 AM

bump.

I need 50 sets minimum in order to do this.

Karl

Posted by: Qarl May 26 2004, 01:33 PM

I know Morphenspectra wants a couple of sets.

Post your name here.

I will make more if there is enough interest.

These are much better than the sets on e-bay. The sets on E-bay are really giant o-rings, and not duplicates of the factory sets that seal around the entire lense.

Posted by: Ferg May 26 2004, 01:36 PM

i'm in for two sets.

Posted by: thesey914 May 26 2004, 01:41 PM

I bought some off eBay that were little more than a roll of plasticine laugh.gif

Posted by: dakotaewing May 26 2004, 01:51 PM

I'll take 2 sets.
Thom

Posted by: tdgray May 26 2004, 02:07 PM

I'm in for one set. Just need to find a lens to go with it. <_<

Posted by: william harris May 26 2004, 02:09 PM

I'll go for two sets. One to use and one for the spare parts bins. beer.gif

Posted by: Martin Baker May 26 2004, 03:29 PM

Two sets Please.

Posted by: horizontally-opposed May 26 2004, 04:11 PM

Count me in for a set!

Now I just need to find one nice lens, too!

pete

Posted by: Lawrence May 27 2004, 12:33 AM

Qarl,

Did I order some last time? I remember *wanting* them, but I can't exactly go to the kitchen cupboard (where I kept my cool 914 parts).

-Rusty smoke.gif

Posted by: tiim5 May 27 2004, 01:46 AM

Please put me down for two sets, Thanks.

Posted by: Qarl May 27 2004, 07:05 AM

Yes Lawrence,

Remember, I sent them to you to your last address (your last military address) and they came back as incorrectly addressed. I confirmed it with you and it was addressed correctly. I resent them, it they never came back.

They were sent in either a yellow or brown padded envelope (about 6x9).

Posted by: Qarl May 27 2004, 07:13 AM

Alright, alright, alright.

I just ordered some more seals.

I will make an official thread later tonight, and compile all of the parties who already responded and how many seals they want.

It will take 2-3 weeks.

Regards,

Karl

P.S. I will look into the tail light seals too.

Posted by: beckdahl May 27 2004, 07:39 AM

I'm in for a set.
Mark Beckdahl

Posted by: 9146986 May 27 2004, 08:12 AM

I'll take four sets

Perry Kiehl
914 Network

Posted by: Lawrence May 27 2004, 08:26 AM

QUOTE(kellzey @ May 27 2004, 05:05 PM)
Yes Lawrence,

Remember, I sent them to you to your last address (your last military address) and they came back as incorrectly addressed. I confirmed it with you and it was addressed correctly. I resent them, it they never came back.

They were sent in either a yellow or brown padded envelope (about 6x9).

I remember the snafu over the address. Yeah, I probably got some, but you can put me down for a couple more pair. confused24.gif

-Rusty smoke.gif

Posted by: morphenspectra May 27 2004, 10:36 AM

at least two sets for me, maybe more

Posted by: TonyAKAVW May 27 2004, 10:41 AM

One set for me.

Posted by: Qarl May 28 2004, 06:46 AM

smile.gif

Posted by: JoeA May 28 2004, 06:57 AM

I'll take a set also.

Joe Andrews

Posted by: Qarl Jun 1 2004, 07:50 PM

Who's your daddy?

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)