Printable Version of Topic

Posted by: Derek Seymour May 2 2009, 11:54 AM

While removing the engine the little plastic frame that holds pin connectors in popped off (see pic) does anyone have a pic or diagram of the correct holes each pin corresponds to?

Posted by: dr914@autoatlanta.com May 2 2009, 11:58 AM

call me any time and I can go over it with you. Need of course to know year and engine size

Posted by: Derek Seymour May 2 2009, 12:33 PM

George saves the day..... again!!

Posted by: dflesburg May 2 2009, 12:40 PM

somewhere I have a drawing...

Posted by: McMark May 2 2009, 12:59 PM

Attached thumbnail(s)

Posted by: ConeDodger May 2 2009, 01:23 PM

George - it is a '76 saved by much effort from California smog oblivion by Derek...

Posted by: SirAndy May 2 2009, 01:48 PM

Mr. Haynes has one ...
Andy

Posted by: Cap'n Krusty May 2 2009, 03:07 PM

So does Mr. Pelican, and his is in color and easy to read. See above. The Cap'n

Posted by: Derek Seymour May 2 2009, 05:42 PM

I gave George a call and he walked me through it

Of course I didn't bring my Haynes with me.. and I keep forgetting that Pelican has so much of this online!

Thanks to all!!!!

New clutch is in! New linkage bushings next then VROOM!!!!

Posted by: 76-914 May 2 2009, 08:47 PM

Hey ConeDodger; how's that? mines a 76 and not yet registered. something I should know? btw the download you gave me doesn't cover parts 1,2 or 3, which is where the electrical info would be. Tons of body and brake info available there?

Posted by: Derek Seymour May 2 2009, 09:03 PM

If you need any help with SMOG stuff let me know

Posted by: 76-914 May 3 2009, 12:28 AM

I might need it. I'll add you to my friends list in case. So yours smogged OK. All w/ original equipment?

Posted by: markb May 3 2009, 12:38 AM

I just backdated a 76 2.0 motor to put in my 72, so I may have some of the smog stuff if you need it.

Posted by: 76-914 May 3 2009, 01:03 AM

I'll definately keep you in mind, Thx.