I restored my targa top when I painted my 914 and dropped the v-8 in. Anyway, while getting things together to go to the WCR, I attempted to put the targa top on for the first time. Suprise, the rear of the lid wouldn't sit down...it stuck up in the rear. I thought at first it was just out of adjustment or tight because of all the new seals.
It all made sense when I looked at a rear latch (part that bolts to the targa top itself) compared to one on a junk lid I had. The bracket itself is identical on both lids, but the rubber is significantly taller on my lid. The rubber looks new on both latches, but taller??? Did early lids take a different height rubber, and perhaps I ended up with a pair of them. My tub is a 75.
Yes, early tops are very different than later tops. There's a thread here somewhere comparing them in detail.
You can't mix match them, they won't fit right.
Andy
Want to SWAP?
I've been wondering why my lid was looooose and I've been racking my brain trying to figure out how to adjust the clip when there's no adjustment. My top bumpers have the smaller rubber like in your picture. If you have a pair with the tall bumpers, I'll mail you and we'll swap out. Bill
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)