Not sure but probably have the 911 oil filler neck. Anyway when I go to put it in, the dip stick tube hits the oil screen inside the tank and the cap ends up at an steep angle. This can't be right?!?
Is there a hole in the screen I should find with the tube?
working on this right now if anyone has the answer...
THANKS
I just put one in a six the other day, and I didn't have to find any holes for the dipstick tubre. It went in easily and I just tightened the clamp on the hose between the tank and filler neck.
CCLINOILMEUP
FOUND IT! ok, so there is a hole in the screen, cap still isn't perfectly straight but way better than before...
Thanks for looking
See you guys on FRI.!!!
Bringing back this thread:
So you can use a 911 filler neck on a 914/6 factory-style oil tank? Would you need to change the dip-stick out for a 914/6 specific one, to get the correct depth markings?
Same with the oil filter console...the one on a911 tank can be used on a 914/6 tank, right?
Thanks,
edit: whoops, a little more digging and I think I found the answer in this old thread:
http://www.914world.com/bbs2/index.php?showtopic=89785&hl=oil+filler++neck++911
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)