Hello,
My machine shop has informed me at least one valve guide needs to be replaced with an oversize guide. I can't seem to fine a good source for oversized guides. Anyone know of a guide supplier?
Thanks.
Dave
Call Engine Machine Service, (310) 641-7019. It's likely you'll have to get guides that are "machine to fit". They sell Technovance guides, the ones you oughtta be using anyway.
The Cap'n
If your machine shop doesn't stock OS guides for T4 heads, then your T4 heads are at the wrong shop!
Contact SI Valves http://www.sivalves.com/
My shop doesn't specialize in type 4, but none do where I'm at. I've searched and haven't found any online oversize 2.0 exhaust guides. Look like I'll have to pick up the phone and start dialing Monday. Thanks.
Dave
PART#021 101 417 A10,MFG.TECHNOVANCE
US $6.00
VW,PORSCHE,O/S EXHAUST VALVE GUIDES,QTY 3,914/4
http://cgi.ebay.com/ebaymotors/VW-PORSCHE-O-S-EXHAUST-VALVE-GUIDES-QTY-3-914-4-411- ECT_W0QQcmdZViewItemQQ_trkparmsZ66Q3a2Q7c65Q3a1Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q
7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem3ef4929fdaQQitemZ270391
222234QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ebayphotohosting
Regarding missed cracks, my father is overseeing the rebuild. Since he is a retired factory trained Porsche mechanic from the 60's/70's, I'm hopeful they will turn out ok. If I had the funds, I would be shipping them out but that blow out the budget on my's son's project car.
I've looked at the ebay listing. I didn't see any measurements and since the ads say they fit everthing from a '70 914 to a '92 Vanagon I've asked for measurements to make sure they are 2.0 guides.
Thanks for the responses. They are appreciated very much!
Dave
Please don't take this wrong (What!?, The Cap'n is being sensitive? Who is this and what have you done with The Cap'n?), but it might be better to blow the budget on shipping than in redoing the work. The Cap'n
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)