Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ steering rack rebuild + turbo tie rod installation write-up
Posted by: Wes V May 15 2009, 08:18 PM
I just (about a week ago) got done taking apart my steering rack to replace the bearings and lube it. I also installed the turbo tie rod end kit.
Here is a write-up;
http://www.performanceforum.com/wesvann/914a/steering-rack/steering-rack.html
The rebuilding of the rack and bearing replacement is also written about on the Pelican Parts site, which is where I got the bearing information.
Enjoy and comment all you want.
Wes Vann
Posted by: perrin1097 May 15 2009, 08:44 PM
QUOTE(Wes V @ May 15 2009, 07:18 PM) 
I just (about a week ago) got done taking apart my steering rack to replace the bearings and lube it. I also installed the turbo tie rod end kit.
Here is a write-up;
http://www.performanceforum.com/wesvann/914a/steering-rack/steering-rack.html
The rebuilding of the rack and bearing replacement is also written about on the Pelican Parts site, which is where I got the bearing information.
Enjoy and comment all you want.
Wes Vann
Nice Thread, I for one appreciate threads like this one, done professionally.. Well Done!
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)