Printable Version of Topic

Posted by: Racer Chris May 20 2009, 08:17 PM

That's right!
Every product shown as "In Stock" on my website is 10% off the listed price for one day only.
Paypal orders received from 12:01am to 11:59pm EDT on 5/25/09 will get a refund of 10% of their payment.
Most items already include shippng in the listed price.
Additional refunds may be given for multiple orders, where combined shipping creates additional savings.
Items with shipping NOT included in the price will be billed for shipping separately at our standard shipping and handling rate.
If we run out of any items we will still fill your order at the discounted price - as soon as possible.

Also on sale: All Tangerine EVO Exhaust Systems - 10% off.
I currently have 5 nearly finished 1 5/8" Street headers on the shelf. They can be completed in as little as 4 weeks.
All other systems may take up to 12 weeks to finish.
A 50% deposit of the standard price is required on Memorial Day to secure the order at the discounted price. The discount will be deducted from the final payment invoice.

If you don't use Paypal you can still participate in the sale. I must receive an email on Monday with the details of your order.
Your payment by check or money order must be Priority Mailed and received no later than Saturday 5/30.

If you haven't been there in a while, check it out. Many new items have been added!
http://www.tangerineracing.com

Posted by: kconway May 20 2009, 09:04 PM

Chris,
I'll be ordering a set of SS fuel lines for a 74 2.0. I assume an early set is required. I'm not sure I understand the adapter piece though, at least if I need a straght or bent adapter. My fuel pump is in the stock location in the rear passenger side below the engine shelf. Which adapter works best for my application?
Thanks,
Kevin

***EDIT***
By the way, if anyone in the SoCal area needs these, I'd be happy to have them sent to me and then hook up for distribution if it will save us a few bucks in shipping.

Posted by: BKLA May 20 2009, 09:10 PM

S W E E T!!!!!!

Posted by: charliew May 20 2009, 09:41 PM

Hi Chris, I hope ordering early is ok for the discount. I ordered a ss fuel line kit and it's for a turbo suby in a 75. I may end up with the pump in the tank using the suby pump. I really haven't gotten that far yet so not sure just wanted to help the economy out. I also ordered the trailing arm shafts. Is there any reason why I shouldn't use a cotter pin and castellated nut on the shafts? It seems like that would be a good idea. Can I drill a hole in them myself? How hard are they? I have a mill and can go slow. I know they tighten on the shoulder and I thought I would use a lock washer also.

I ordered early so you can wait till 5/30 to ship it I guess.

Posted by: Racer Chris May 20 2009, 10:04 PM

Straight is best for a stock fuel pump in the stock location.

I can easily fit up to 3 fuel line sets in one box for some add'l savings if you get some friends to go in on the deal.

Posted by: championgt1 May 20 2009, 10:15 PM

I will be picking up one of your fuel line reducers. I need one to complete my car. I almost puked when I saw the price of the factory rubber stlyle reducer hose.

Posted by: Racer Chris May 20 2009, 10:25 PM

Rules are rules. I guess I should refuse the payment so you can re-order on the sale day.

Maybe I'll just pretend it didn't come in until next Monday.

I still have to bend the 1/2" line anyway as I haven't bent any of them up in advance.

The pivot shaft material is 4340PH and is pretty hard, I think around 36 Rc, but with a mill and a good drill bit you shouldn't have a problem.
The length is the same as stock, so I'm not sure if there's enough length for a castellated nut and a cotter pin. You could use the stock locking nuts. I use nylocks.

Posted by: RobW May 20 2009, 10:46 PM

Cool deal Chris! Thanks.

If any one wants to go in on shipping to the East Bay, CA (Pleasanton) area PM me. I'm thinking of getting one of those engine lift plates.

R

Posted by: kconway May 21 2009, 08:38 AM

Chris, can you just add the transition at the end of the long lines where they come out of the firewall?

Kev

Posted by: Racer Chris May 21 2009, 09:30 AM

I can't do that.

Posted by: Racer Chris May 21 2009, 09:23 PM

I added a couple of more products today that we use on customers' cars but never listed online.

Posted by: tomeric914 May 21 2009, 10:15 PM

Chris, Is your shop going to be open on Monday? I'm thinking about saving on the shipping and just driving down to pick up a roll cage.

Posted by: Racer Chris May 22 2009, 07:46 AM

I'll be there for a few hours, early in the day.

Posted by: Racer Chris May 22 2009, 09:53 AM

As of this morning, my fuel lines page now has engine compartment lines listed separately.

Posted by: Racer Chris May 23 2009, 08:42 AM

A for the weekend crowd.
For anyone with questions, I probably won't be viewing my emails until Monday am. I will be here tonight and tomorrow evening to answer any questions in this thread or by pm.

Posted by: firstknight13 May 23 2009, 10:04 AM

chris i will be down to pick up your engine plate to remove my engine....as i have no clutch...LOL.......maybe see some of you down there.....ray

Posted by: scottb May 23 2009, 11:20 AM

chris,

i will run down on monday to pick up some cases of oil. if you could pm me the hours you will be in the shop, that would be great.

scott

Posted by: Racer Chris May 25 2009, 06:10 AM

Come on over Ray. You should change the exhaust to the earlier style. I can loan you a set of 2.0 SSI's off the car I picked up Saturday.

Posted by: stepuptotheMike May 25 2009, 06:32 AM

Thanks Chris!

Did my part to help the economy

"Really honey... I don't know where that came from"

Mike

Posted by: scottb May 25 2009, 07:33 AM

just sent in payment and about to jump in the car to come down and pick up!

cheers,

scott

Posted by: pktzygt May 25 2009, 07:47 AM

I ordered a set of fuel lines. I want to drive down there someday and check the place out, but for now shipping will have to do. It would be a pretty day for the drive though.

Posted by: Gary May 25 2009, 09:16 AM

Set of fuel lines and replacement trailing arm shafts headed my way - thanks Chris!

Posted by: Steve Snyder May 25 2009, 09:24 AM

Chris, I sent you a PM on this, but wanted to point it out here, too. When I add the SS fuel line adapter to my cart (selecting "Straight" and clicking the "Add to Cart" at the very bottom of the page), I get a line item in my cart for "Dash 6 AN Fittings welded onto fuel lines Select Shape: Straight $23.00 USD" which is definitely not what I want. Can you fix that? Thanks!

Posted by: championgt1 May 25 2009, 09:31 AM

I was just about to write the same thing. I am guessing you are not actually open today. I will call and order this part tomorrow.

Posted by: Racer Chris May 25 2009, 10:01 AM

Actually, I'm in the office for a couple more hours.
I'll fix that webpage problem right now.

Posted by: Racer Chris May 25 2009, 10:12 AM

All better!

Posted by: championgt1 May 25 2009, 12:33 PM

I just placed my order for the reducer hose. Thanks for fixing the webpage.

Posted by: tomeric914 May 25 2009, 09:59 PM

Just a big note of thanks to Chris for offering up the Memorial Day discount! I picked up my roll cage earlier today! Now for the time to install it

Posted by: strawman May 25 2009, 11:00 PM

Hope I made it in time! I pushed "submit payment" before the deadline, but did not get a confirmation from Paypal until one minute after Midnight Eastern Time!!! Either way, I'll take the product -- so don't fret the discount. I appreciate all you do for the teener world and don't wanna haggle over a few bucks. Thanks again!

Posted by: Racer Chris May 26 2009, 07:45 AM

As long as it was for at least 500.0 I'll give you the sale discount.