Printable Version of Topic

Posted by: veltror May 21 2009, 05:14 PM

look at http://cgi.ebay.de/Porsche-914-Kotfluegel_W0QQitemZ120421929134QQcmdZViewItemQQptZAutoteile_Zubeh%C3%B6r?hash=item120421929134&_trksid=p3286.c0.m14&_trkparms=72%3A1229|66%3A2|65%3A12|39%3A1|240%3A1318|301%3A0|293%3A2|294%3A50

Posted by: SirAndy May 21 2009, 05:23 PM

I thought all the factory replacement sheetmetal had that dull red primer on it ...
Andy


PS: I just looked at a factory front clip replacement that is sitting on the shelve at GPR. Still has the Porsche sticker on it and all. Same red primer i've seen before.

Posted by: veltror May 21 2009, 06:13 PM

I recently saw a new rear boot lid that was black also?

Posted by: ChicagoPete May 22 2009, 08:51 AM

The last run of factory GT flares are in black also.

I believe the first run were bare metal, second, in green primer, and the third in black.

Peter

Posted by: DEC May 22 2009, 09:18 AM

All the newer sheetmetal done by Porsche has the black primer.


Look at http://www.914-shop.de/karrosse.htm you can
see that the front fender are black and the rear are red.

Posted by: So.Cal.914 May 22 2009, 11:57 AM

Ok I see a front fender...Where's the wing's?

Posted by: SirAndy May 22 2009, 12:13 PM

I guess we only get the old stuff over here ...
Andy