Printable Version of Topic

Posted by: A&PGirl May 22 2009, 05:13 PM

Please delete the thread

Posted by: Cap'n Krusty May 22 2009, 06:01 PM

Glad you got what you needed. However, you might have done better had you asked here. I know I have several of each of those, and I'm sure many others of us do, too.

Posted by: URY914 May 22 2009, 06:03 PM

I have at least three sets I wish I could get rid of....

Posted by: Al Meredith May 22 2009, 06:36 PM

I just picked up an OLD 1.7. I think it could have been a bus engine. It has no windage trey. It was partially disassembled but the 1/2 I took appart had Zink plated tin. The FI air box was plated as well....no paint. Any one know what that is all about?

Posted by: jcambo7 May 22 2009, 06:49 PM

How much would you want for a set?

Posted by: Pat Garvey May 22 2009, 06:59 PM

I have a 1.7 set you can have for shipping. Not complete on the bottom, but top is. "610" stamped on the sheets. Needs resto. Shipping would probably be 20-25 bucks, though that's iffy.

Sure would like to see them get used. Almost recycled them 2 weeks ago.
Pat

Posted by: A&PGirl May 22 2009, 07:11 PM

I have 4 engines that are missing these same pieces. 2 1.7's and 2 2.0's. I would even bet my Dad's 1.8 are missing the same 3. Safe to say I will probably be needing another 3 sets.

Posted by: jcambo7 May 22 2009, 07:11 PM

Are they engine specific or one size fits all? I have a 2.0...
James

Posted by: jcambo7 May 22 2009, 07:14 PM

Hey Carrie.
Do you happen to know of any good body shops that you could reccomend to me for 914's? I happen to have a damaged front left fender that needs to be cut and replaced. I have a replacement fender.