Printable Version of Topic

Posted by: Vacca Rabite May 26 2009, 04:42 PM

I am taking my header to the ceramic coater on Friday. I need to get new gaskets for re-installation but they are not a standard size that I can find in a FLAPS.

So, anyone know what size they are, or where I can order them from?

Zach

Posted by: r_towle May 26 2009, 06:28 PM

well,
The stub pipe gaskets...maybe Foley.
The big flange...go to Midas or Mieneke muffler...they have almost every shape you can imagine in stock...up on a huge rack.

Rich

Posted by: Cap'n Krusty May 26 2009, 06:51 PM

Eurorace? The Cap'n

Posted by: orange914 May 26 2009, 07:16 PM

hows the motor coming along? you found the oil pressure issue?

Posted by: westdesert May 27 2009, 12:53 AM

Zach
what does it cost to coat w/ceramic and what is the benefit
Kelly

Posted by: Vacca Rabite May 27 2009, 08:01 AM

Westdesert,

ceramic coating provides protection from rust that won't flake off from heat IF (big if) it is applied correctly. It also insulates the header pipes so that they do not melt your clutch and speedo cable. I am doing it for the heat protection, as the Eurorace header is known for melting cables.

If it is done incorrectly, though, it is ~200 wasted dollars, as it will start to flake off quickly.

Zach

Posted by: Vacca Rabite May 27 2009, 08:02 AM

I can't find a web site for them. Or a phone number.

Hence, my question.
Zach

Posted by: Cap'n Krusty May 27 2009, 09:35 AM

I'm pretty sure I wouldn't spend a bunch of money on a product with no product support ........................ Be that as it may, the earlier suggestion that you go to a good muffler shop and match something up is a good one ..............

The Cap'n