I have searched all over rockford illinois for the bolt that holds my wheel adapters on..the old ones have been rounded out and i can't find the correct bolt anywhere. the bolt size is m14x1.5x25mm. Most places can get me a m12 or m16, but no m14, unless its a course thread at 2.0, can't really use that for the rotor. The bolt is called a flange head bolt. Anyone have 12 of these that i can buy from them, or have...i really need them to get my rims back on my car and out driving again. Here is a picture of what the bolt looks like
Whoops, shouldn't search the internet after 24 hours awake then ambien.
These are hard to find! Here are some 45mm you could cut down,
https://www.fastenersclearinghouse.com/fch/main.nsf/fSearch?OpenForm&Start=1&type=R&Cat1=PRM460D65E02814;&Cat2=FL85C6BFBB588;&Cat3=&Cat4=&Cat5=M14&Cat6=&Cat7=
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)