Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Belly Pan

Posted by: Engman Mar 3 2004, 07:20 PM

Well I got my belly pan sandblasted and painted today - did the same to the wiper arms. But I need the two gaskets that run along the belly pan. Yep them be holes from the rust monster - I anm going to fill them with an epoxy - This thing will be nearly rustproof with the paint on it. Anu one have any gaskets?

Attached image(s)

Posted by: Engman Mar 3 2004, 07:21 PM

Here is a pic of the wiper arms

Attached image(s)

Posted by: steve@ottosvenice.com Mar 3 2004, 07:43 PM

You are looking for:
901.341.168.00 and 901.341.169.000
If you need these send me an Email. Steve

Posted by: Joe Ricard Mar 3 2004, 08:05 PM

I had my belly pan copied and made out of Aluminum. Couple bends here and there and some welding. Cost me a 6 pack of beer. No gaskets but it kept road crap off the steering and brake items.

Posted by: 94teener Mar 3 2004, 09:04 PM

I use an aftermarket seal from JCW. Works beautifully on the belly pans. I've got a bunch of it, send me your address and I will mail the seal to you.

94teener,
formerly, philinjax
philliz914@earthlink.net

Here's a pic.

Attached image(s)

Posted by: Dave_Darling Mar 4 2004, 12:08 AM

Hell, I bet you could make some out of that garage door seal material like in that one article on Pelican... Or just a generic slip-on seal, a wide one.

Or take Phil up on his generous offer.

--DD