Here is is...this is located on top of the engine right next to the crankshaft position sensor. This is the one that had the blade style connection on it.
First pic, shows the location.
and second shows better detail, kinda sorry for the blurry pic. but its just a blade style connection that looks like it was cut and twisted with some vice grips
Also, what is this sensor? Mass Air Flow?
here's a link to my progress thread...
http://www.914world.com/bbs2/index.php?showtopic=85845&hl=
Forgot to say that it is a 1996 EJ25.
Pic #1&2 are oil pressure switch.
Pic #3 Idle Air Control
Also, what is the difference between the ignitor and the coil? I am confused as to what needs to be on the engine. Right now there is a coil pack with 4 leads coming off of it which goes directly to each plug. and a connector from the harness.
since i'll be doing this soon, i hope you get some good responses, and if you can please keep track of what your doing! hopefully tony gets his schematics up sometime soon.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)