Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Rim fitment

Posted by: Ltr450Cam Jun 25 2009, 01:26 PM

What is the max rim size without rolling the fenders and with rolling them. I couldn't find anything on google

Posted by: tat2dphreak Jun 25 2009, 01:35 PM

welcome to the board!

I think about 7" wide is max for close to stock, IIRC maybe 8" on the rear. a search will tell you what I can't remember... I just wanted to welcome you!

Posted by: 70Sixter Jun 25 2009, 03:24 PM

Yes, WELCOME!

And the max wheel size depends on several factors like offset (or the easier for me to understand - backspacing). Also tires of the same size do not always have the same dimensions.

Offset is measure from the wheel center line. Backspace from the mounting surface to the inner rim.

Lowered cars usually increase the likelihood of tires rubbing somewhere.

The 7" 911R wheel probably works because the backspacing sets it inboard. I'd think normal 7s would be tough.

But 914s are not all the same, nor even the same on left and right sides.

Posted by: carr914 Jun 25 2009, 06:48 PM

QUOTE(70Sixter @ Jun 25 2009, 05:24 PM)

Yes, WELCOME!

The 7" 911R wheel probably works because the backspacing sets it inboard. I'd think normal 7s would be tough.

But a 911R wheel will cost more than a lot of 914s. Regular 7"s will work, but you can't go crazy wide on the tire, probably 205/50/15s

T.C.