Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Subaru power specs

Posted by: r_towle Jun 26 2009, 10:18 PM

So, what is THE most powerful subaru motor?

What are the torque specs?

Rich

Posted by: Dr Evil Jun 26 2009, 11:14 PM

I really want to do a 3.0 2003 and newer motor. I bet it can be made to scream.

Posted by: sean_v8_914 Jun 27 2009, 02:25 AM

300 hp is common place in the WRX world. Steve Johnson builds them for the sand crowd by teh dozen

Posted by: Vacca Rabite Jun 27 2009, 05:24 AM

Are you looking for stock or modified?

Zach

Posted by: r_towle Jun 27 2009, 09:46 AM

Just a bolt in swap....so stock to start.
I am seeing complete motors, WRX (dunno which model) for less than 5k
Complete (on ebay) with all sensors, turbos, harness, and ECU.

3-5k seems to be the going rate now for a complete WRX motor, but I am not sure which one is which...I did go to renegades site and read the list, but the ones I am seeing are from other cars etc.

Rich

Posted by: TonyAKAVW Jun 27 2009, 11:19 AM

I think that a lot of the engines for sale on ebay are going to be "JDM" imported engines. The most powerful engine stock is the most recent WRX STI motor, some variation of the EJ20. The STI has been around in Japan for a lot longer so there is a bigger variety of those motors with different horepower. You'll also see motors given the wrong designation such as those ending with -TT or deTT or something like that. No Subaru motor ever had those designations, but for some reason they get advertised that way (Nissan turbo motors are sometimes designated with those letters apparently).

Lat time I checked, a USDM (US Domestic Market) WRZ STI motor went for more like $7k, but that is maybe 3-4 years now. Those motors are particularly desirable for people with normal WRXs or RS25s. Be careful about the twin turbo motors, they are harder to get working than the single turbo or N.A. motors.

-Tony

Posted by: lotus_65 Jun 28 2009, 06:03 AM

http://en.wikipedia.org/wiki/List_of_Subaru_engines
bravo.gif
thefleur

Posted by: pktzygt Jun 28 2009, 10:40 AM

I bought a JDM ej20g motor and transmission for $1340 shipped. It supposedly makes 240hp i think. I just took a deposit for the transmission to sell for $1000. Motor goes in on Tuesday or Wednesday.

Posted by: d914 Jun 28 2009, 10:48 AM

I bought a ej20k a while ago,,,275 hp stock...the jdm spec motors can be cheap and give you some time to work stuff out. Im not too concerned if I only get a year or two from the motor.. Replacement engines are cheap....the conversion stuff is the expensive stuff!!

Im looking into redoing the bottom end before I put in my car though... Just a little cheap insurance....

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)