Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ 914-6 flywheels?

Posted by: bhfast Apr 1 2003, 04:08 PM

correct me if I am wrong, but you can OE 914-6 or early 911(w/901) flywheels with engines from 2.0-2.7. I've noticed a wide range of prices from different supliers. Also does any one have a clutch recommendation for a six conv.
Brian

Posted by: joea9146 Apr 1 2003, 04:14 PM

The early 911 flywheel will work up to a 2.7..... if you go 3.0 or above you need a special flywheel. I got my Flywheel and clutch package for KEP Kennedy Enginered
Products. I have a 3.0 with the satge 1 clutch and 228mm flywheel. I believe many other Vendors use KEP as there suppliers....

Posted by: TimT Apr 1 2003, 04:40 PM

If you can get one use one of these, a 906 flywheel. Dunno how much they cost or if they are even available but they appear light!!! The Kennedy cluthes are great, also centerforce are good replacements, and the Sachs is too

Posted by: echocanyons Apr 1 2003, 08:07 PM

Wevos 915 flywheel/clutch looks really light IPB Image
not sure of the street applications though

Posted by: TimT Apr 1 2003, 08:34 PM

the Wevo is just an on off switch. Dont even thinik about holding your car on a hill with the left foot, and if you trailer your car push or winch it onto the trailer

Posted by: Brad Roberts Apr 4 2003, 02:13 AM

Actually.. WEVO is working on a street setup using that flywheel and clutch setup.

B