Printable Version of Topic

Posted by: my928s4 Jul 5 2009, 03:56 PM

After wheeling the roller into the sunshine and clearing 2 years of dust and some crud still in the wheelwells these parts were laying in the driveway. It was down by the passenger rear wheel well but could have come form anywhere as there was water and air involved.

This must come from somewhere obvious but got me stumped.

Posted by: v82go Jul 5 2009, 04:01 PM

Looks like a flap from the lower part of the fan housing.

Bob

Posted by: my928s4 Jul 5 2009, 04:14 PM

Thanks Bob, if that is what it is must have fallen when I dropped the engine and lodged itself somewhere !

Posted by: orange914 Jul 5 2009, 11:58 PM

i think the gasket is from where the heat exchange clamps to the fan housing (by where the flap is from)

Posted by: cwpeden Jul 6 2009, 01:25 AM

That gasket used to be foam that was glued to the flap.

Posted by: Pat Garvey Jul 6 2009, 07:31 PM

Agree! The flap is the flap, but the gsket was never cork(looks like), but foam with a n adhesive backing.
Pat

Posted by: sean_v8_914 Jul 6 2009, 11:32 PM

those flaps are getting harder to find