I did a search and I " think " I have the answer to this question. I removed my fuel tank in my 75 last year and I don't remember the orientation of the two fuel fittings/pipes on the bottom of the tank. From my search it looks like they point towards the passenger side fender maybe slanted towards the firewall 10 degrees or so. I also have added a thru body sway bar if that matters. I have about 20 inches of extra hose to make a good service loop but I want to make sure the fittings don't hit the sway bar.
Fitting end up behind the sway bar so just don't point them forward. If you have rigged up a service loop then point them to the drivers side a little aft. that way the hoses will route across the car and then loop back to the hole where they go to the fuel pump or fittings.
Thanks Joe.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)