Printable Version of Topic

Posted by: SirAndy Mar 6 2004, 10:03 PM

hey guys,
anyone in the greater bay area who has a front hood he wants to part with? (cheap )

i would like to practice cutting a nice vent for the oil cooler air ...
Andy

Posted by: morphenspectra Mar 6 2004, 10:28 PM

Got one for free, but were in oregon

Posted by: SirAndy Mar 6 2004, 11:28 PM

Posted by: jonwatts Mar 6 2004, 11:36 PM

What's your timeframe, Andy? I'm tempted to pop for Getty carbon fiber lids but it might be 6 or so weeks to get them.

Posted by: SirAndy Mar 6 2004, 11:39 PM

Posted by: jonwatts Mar 6 2004, 11:52 PM

I think I only need the hood for the front fenders to be mounted so we could probably work something out. Let me know how Brad time progresses.

Posted by: Andyrew Mar 6 2004, 11:58 PM

I've got a front hood. with latch and everything. What vent are you talking about? I've got a front hood. Dont know if its too much for you to drive. But you can have it. Just sitting there. Its straight and been sitting in my backyard for a year. Pm or email me if you want it.

Andrew

Posted by: SirAndy Mar 7 2004, 12:33 AM

Posted by: Mueller Mar 7 2004, 02:50 AM

I have one.........

Terrance also has one which he might be finished with for his 'glass project

Posted by: brant Mar 7 2004, 09:32 AM

Andy,

I've done this once in metal..
I don't have digital photos... but if you want me to snail mail you a picture, I should be able to find one...

I cut it in a V shape... sort of an inverted NACA duct...
you can leave all of the support ribs and still get plenty of drop.. I cut the V (front and side cuts)... then rolled the center section down about 14 inches... then used some cardboard templates to trace out some metal sides... welde those in and it held the shape pretty well... Also had to make a small front lip and weld that in...

because the hood is such a flat panel, there was a little bit of welding warp.. and more puddy in there than I'd like...

I did mine from metal because the race class I was in at the time required "all body panels be of the original material".... I figured bondo is an original material right?

brant

Posted by: L8Apex Mar 7 2004, 10:46 AM

yeah, I should have one for ya in a few weeks after I find some time! Also have your door guts too!

Posted by: Brad Roberts Mar 8 2004, 12:26 AM

I have a hood for free.. but you cant cut it at my place. I refuse to let my friends do this to their STREET cars. You gain zero by doing it this way. Most people that do this are trying to exit air that they cant take under or out the fenderwells because of a expensive fuel cell they have already put in the trunk floor.


B

Posted by: Andyrew Mar 8 2004, 12:38 AM

Dang and I thought I could get my 914 bag out of the deal..

Ahh shoot. Well andy if you still want it, its yours.. Ya know, could be a nice drive (trying to get some room for more parts..)

Darn you brad!! (kidding)

Andrew

Posted by: Brad Roberts Mar 8 2004, 12:40 AM

We are *almost* unpacked at the new shop. Hang in there.. you are'nt missing much.


B

Posted by: SirAndy Mar 8 2004, 01:02 AM

Posted by: Brad Roberts Mar 8 2004, 01:10 AM

Right this minute you have NO need for it. Come talk to me when you are ready to pick up the 3.6 engine.


B

Posted by: SirAndy Mar 8 2004, 01:17 AM

Posted by: Brad Roberts Mar 8 2004, 01:27 AM

It wasnt intended as a direct groin shot.. just a reality check.

B

Posted by: mikerose Mar 8 2004, 08:48 AM

Andy, You can have the one off the green 76. I am in Pittsburg. I will see if it will fin in the back of my car. if so I can bring it the san leandro just let me know.
Mike, the other mike