I do have the old style polished knobs (at $78), but they were very labor intensive, the quality control required quite a few rejects. These new ones are a satin finish that looks like the new ones at the dealership. At $285.
I do have the crush washers at $8 if you need them.
Currently I have 6 of these made up and if you want one let me know these will be at $65 after (still a good value, but hey save some $ if you're in the market).
I think you'll like these!
Attached image(s)
New 2nd gen Knobs - look very simular to new ones at the dealer that list at $285
Attached image(s)
O
M
F
G
great work man!! very great!
I have a near perfect stock one or I would be jumping on this. very nice and a great bargain!
add one to my list please! No crush washer needed.
I vote Mikey for Member Vendor of the Year! What does he get???
nice +
if I had a 901 I'd want one ,,,nice
Excellent effort! Looks like you've got a winner!
Thanks,
I will want one. I have a good crush washer so won't need that.
JIM
I would also like to thank Todd Enlund for his help on the graphics side to get these done. Todd, I've got you down for one.
Thanks again man!
Keep em coming Mark
You have been doing an amazing job with all your products.
Please count me in for one of your knobs
Mark, you are totally bust'n a move on these parts. wtg!!!
I have another part that when it's done will blow your mind. Unfortunately it's at least 2-3 months out.
Wow, thats really nice. Is it like the original in the clear expoxy or is it a sticker or something. I cant tell. Pretty nice. You THE MAN !!!
+1 w/crush washer. (914 pattern)
Thank You
Sweet! Sign me up too (901 pattern) and a crush washer.
-Steve
I was looking for one of these last week. Another great job. Put me in for a 901w/washer.
I want one of the 915 (911) shift pattern.
Mike
Actually I'll take a 901 one also. So for me I want the 901 and the 915 one.
Mike
Looks nice. Count me in for one.
Hey Mark,
Damn I am trying to save my money BUT I want one of those. 901 pattern with crush washer please.
Ken
count me in for one for a 901 trans, they look awesome
These look absolutely incredible! I wish I needed one!
ooh yeah i want one too , need the crush washer also
I'll take a 901 pattern with crush washer please. I'd like to combine with the new front targa/windshield seal when both are available. Thanks for all you are doing for the 914 community.
I second the vendor of the year!
I would like two of the 901 pattern, not sure about the crush
washers yet.
John
I appreciate the props, there are plenty of other vendors that to provide excellent products, I reciently got in on the Engman fuse panel buy and was impressed with the quality of the product, and the level of detail they put into the product. Jwest makes some really cool stuff too.
I just appreciate the support from you guys here, without this type of community, I could not provide these products at a reasonable price. That's why I give the best pricing right here.
Thanks,
Mark
AKA Mikey 914
Put me down for a 901 one for the LE. Nicely done once again Mark
Hey man nice knob! .......for some reason that sounds a bit
1 914 knob.and washer can you work up a boot too?
Is the secret project a rust free BODY? I've bought a lot of your stuff and it's top quality. Thanks! Bill
Hi, I want one too but before you put me down on the list I will PM you and ask about shipping to me out here in Japan. It shouldn't be too much as it looks small and light like stock. Nice work too!! That looks amazing!! Thank you for your service in the 914 community.
Jamie in Japan
Put me down for one as well with the 901 pattern and washer.
I was wondering if you going to start producing these. I remember seeing your initial post about them more than a year ago.
Give us some details on the materials used in the fabrication. Is it the same as OEM or something better?
thanks again.
Put me down for one in 914 shift pattern, thanks.
Add me to the list. The new owner will love it. Thank you.
I see rubber boots around for about $15 but not leather...you might see if anyone else is interested and offer a package deal? Or it might just be me. Thanks Bill
Put me down for one w/ standard 914 shift pattern.
I most definetly want one! Put me down for one stock 914 pattern (901) and also will need a crush washer too shipped to Japan, thank you so much!!
I'm in for 1, with crush washer
Add me in for one for 914 pattern.
Put me down for 1-914 and 2-915 shift knobs.
Cool product! I'll take a 901 pattern.
I'll take one with the 901 Shift Pattern
Thanks!
Put me down for one 901 with washer.
Thanks
I'll take one with crush washer. 914 shift pattern.
Nice job, Mike.
Would like a 914 pattern bitte.
1 914 pattern for me, please.
Thanks all. Some of the costs on these wound up being more. The presale will remain the same, thanks to all of those that signed up for these. I will send out the payment information on these this weekend.
The regular price on these will be going up to $72 after the pre-sale.
I would like to purchase one with the 901 pattern/Jwest Rennshift handle.
-Thanks
Pete Sullivan
I would like one of these as well without the crush sleve. Put me down on your list.
Thanks,
Chris
I'll take one with crush washer. 914 shift pattern.
Thanks,
Blaine
Looks great, Mark. I'll take a 901 pattern please - don't need the crush sleeve thanks.
Put me down for a 915, no sleeve.
Please put me down for a 914 pattern and a crush washer.
Great work!
Ken
Mark, Put me down for one in 901 + thrush washer. Thanks John
I'll take one for a 914 with crush washed. Thanks Mike
I love it, and would like to be put down for one with a crush washer as well (901 tranny). Just let me know the final with shipping and where to send the $$. Great looking work!!
John-
Please count me in for one in the 901 shift pattern with a crush washer.
Hi, These are fantastic I'd love to take one off your hands. I'll see if I can drum up any more interest from the UK.
So put me down for a 914 with crush washer.
Thanks
Put me on the list. I'll need the crush washer please.
Nevermind. I just realized that I already ordered. Again, great work!
Please add me to the list for a 901 style, no crush sleeve needed
thanks
Brian
1 for a 901 please
I'll take one for a 914 with crush washer, great work! Let me know the payment details.
Thanks
Ted K
I'll take one for a 914.
Thanks a lot!
Harald/Germany
Hi, I already ordered one on the previous page, (914 pattern with crush washer) and I was wondering how do we pay you? I tried to email you last week but not sure if it went through. Can we use PayPal? Thanks! I can't wait to get that new shifter. Cheers
Jamie in Japan
Please put me down for 1 with crush sleeve for 914 pattern. Thanks.
Pre-purchase is closed, thanks to all for your support.
Hi - how is this project coming? Any updated ETA?
I don't need one, but NICE work.
I would like one, too. 901. not sure what crush washer is but I currently have a third party Momo ball at the top, so I will probably need whatever the original shifter needed.
Guys these are taking longer than I wanted. I ran into problems with the vendor that we were using for the plastic resin. We placed the order and were told we'd have it the next week. Next week came and went, and went again. I just got the resin in yesterday and we've started casting I got my first 7 out of casting and Have started polishing. The first ones will actually start shipping in about 1 week, and the orders will be filled at about 18 per week, so they will be filled in about 2 weeks.
I apologize that these are taking so long, and if anyone wants to back out I understand, and will issue a refund.
As a thank you for your patience those that wish to stick with it will receive with their knob a section of my latest seal. This is the engine to deck lid seal that is NLA. I've been so busy with this and what I have going that I haven't had the opportunity to even mount mine, and I will not be offering it up until I get caught up with what I have going on now.
Just wanted to follow up and until I had the raw materials in hand I couldn't get an accurate estimate as to when I would have these.
Attached thumbnail(s)
Attached image(s)
I don't know why anyone would cancel because all your products to date are worth the wait. Supplier issues happen all the time in the real world. Mark if anyone HAS to have their order before mine go ahead and put me near the end of the line as I'm not in a hurry.
Looking good so far!
Thanks guys. I try not to take any money on item until I have my production ready. This is why this has been very stressful for me. I appreciate your patience, but we are finally in the home strech here. Now I'm going to be very busy polishing for awhile.
Thanks to all.
-Mark
Thanks for the update Mark, I can't wait (well, actually I can) to see mine in person!
Bill
Attached image(s)
Don't sweat it, man. We super appreciate your taking the time to manufacture all
these great parts. We need more vendors like you.
My car has been waiting 37 years for this part, another month won't matter.
John
i would like one with a 901 pattern/ j west shifter
No worries Mark when they get done they get done. I admire your no compromise on quality and everyone here appreciates that. Sometimes things get in the way and that ok
These are finally starting to move. I got 6 out of the 7 original knobs (I had to reject one) that will ship out Monday, and 26 done this week that will be shipping a week from Monday, and the balance will be shipped the following week.
So some forward progress. Just wanted to update everyone.
These are finally starting to move. I got 6 out of the 7 original knobs (I had to reject one) that will ship out Monday, and 26 done this week that will be shipping a week from Monday, and the balance will be shipped the following week.
So some forward progress. Just wanted to update everyone.
Attached thumbnail(s)
Awesome!
Just received my Ball! Beautiful product Mark!
I would like one in the 901 shift pattern. I will also need the crush sleeve.
Mine came in yesterday. Looks great! Thanks Mark
Wow, Mark!
Mine arrived today - fantastic job brother.
thanks, m.
I received mine-Excellent!
Thanks,
Blaine
how do I order and pay? 901 w/washer.
100% Perfect! Got mine in along with the engine seal. Thanks Mike
????????? What's the best way to get the old knob off...the shim makes the fit super tight. To install the new knob do I just pressure it down? With a little lube or not? Thanks
I got mine too today!! Thank you!! Its so cool !! I love it!! I was very pleased with the quality and hope to order again from you soon. Thank you!!
Mine came this week - Looks great!
What's the seal that came with? Looks too small to be an engine seal...
...I WANT ONE ! 901 shift pattern with a crush washer pretty please!
Do I paypal you now ...Dave
Installed...
New second gen knobs availabe -heaver resin, higher quality-
I do have the old style polished knobs, but they were very labor intensive, the quality control required quite a few rejects. These new ones are a satin finish that looks like the new ones at the dealership. At $285.
I do have the crush washers at $8 if you need them.
Currently I have 6 of these made up and if you want one let me know these will be at $65 after (still a good value, but hey save some $ if you're in the market).
I think you'll like these!
Attached image(s)
I'd take a 915 knob if you have one.
I'll take a Gen II 915 knob with a sleeve also Mark
I need to check back with my leather guy. We had talked about it, but had not finalized anything.
I'll check back with you tomorrow on the boot, he may have made up a few.
-Mark
Mark, I'll take one of each; 901 and 915.
Thanks,
E.
I posted this in the classifieds cause I'm a noob and didn't read all of your post.
Can you make some with 1 where 2 is and make it a 4 speed for the v8 guys and others who don't have or use 1st gear to start but 2nd.
Just a thought...
I can, but the set up is about $175, If I could get 8 guys that need that exact layout (one set up) I'd do it.
So the real question is how many people need them?
Also, if I remember correctly, George had some goofy balls .
I mean a few that were non-standard.
another nice product from mikey
if i did not already have a mislabled knob in my v8 - i'd be all over this.
4 left now
Will Take one of those 4.....need a crush washer too!
PM sent~
What does that crush washer look like? I think I need a new one if you have a spare.
Great work, Mike!
Re: 4-speed knob . . . Chris - see next post . . . .
Thanks,
3 left now.
This is what the crush washer looks like. I can make them, but have been just buying them. I may look at these in the future. Not hard to make, just takes some more tooling.
The graphics were not expensive, it's how I produce the inlays that has a set up cost as well as a production cost. The material must also be UV stable. So to get materials that met my criteria I have to pay a little more. It would have been really easy to do when I set up these.
Attached thumbnail(s)
Hi Mike,
I'd like 2 901 and 1 915 plus the crush washers. Thanks,
Garry
[/quote]
Todd I think it's time to design a nice & cool custom T-SHIRT
[/quote]
YES! A picture of a TROJAN. The words "I use nothing by 914Rubber"
OR
This modified to have 914rubber.com on the front!
P L E A S E !!!!
I'll take one + crush washer - I think I also need some other bits off you too Mikey so I'll make a list and send it all over at once.
thanks
[quote name='Mr.242' date='Jun 17 2010, 06:35 AM' post='1331863']
[/quote]
Todd I think it's time to design a nice & cool custom T-SHIRT
[/quote]
YES! A picture of a TROJAN. The words "I use nothing by 914Rubber"
OR
This modified to have 914rubber.com on the front!
P L E A S E !!!!
[/quote]
I think it would work
1 Left !!
I got one of Marks 911 balls and it is nice. It probably will go on a cable shifter on the 914 for a suby tranny.
I'll take the last one (+ a crush washer) if it's still available.
Email: lightweight _911@hotmail.com
with the total inc USPS shipping to the UK & your Paypal account info.
Will you be making any more ?
Mark,
This is what I need for my 4 speed 930 on my cable shifter. I think there are a few guys that need them.
Bob
I'll try to get some of these made up (930), I'm not sure if I'll get to them before I go on vacation.
Anyone else need this patern???
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)