Does anyone know if an aftermarket gas gage would work with the stock 914 tank sending unit?
Need a gas gage in my track car, would like to see if this would work?
Most aftermarket sending units are 0 ohms (empty) to 90 ohms (full) the
914 gauge is 0 ohms (full) , 90 ohms (empty). Just the reversed.
so would it work backwards?
That would be cool.
Rich
Actually, the 914 guage is not so easy as 0-90. Its more like 36-89 or some such. I forget but did this on my 914. Call Palo Alto Speedo or HollyWood speedo. They sell the right VDO gauge that will work and can adjust it.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)