Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Stuck pushrod tubes

Posted by: krazykonrad Aug 18 2009, 09:03 PM

My pushrod tubes will spin but won't pull out. Heads are still on. Any suggestions?

Thanks,
Konrad

Posted by: r_towle Aug 18 2009, 11:05 PM

vice grips

RIch

Posted by: inschool Aug 18 2009, 11:23 PM

pull it harder.

Posted by: 9146986 Aug 19 2009, 12:47 AM

If it's a 1.7 they have indentations on the tubes, and you can get a open end wrench on them to turn and push out.

Posted by: Drums66 Aug 19 2009, 01:53 PM

Be carefull......they can lay you open!!!!!!!!
"ends are very sharp"

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)