I have an OEM vinyl visor that has a crease in it, how can I remove this crease?
-- Rob
I'd set it in the sun and see what that does. Next would be a hair dryer, and last would be careful warming with a heat gun, very careful!
don't use an iron... I know this all too well
Thanks guys, I'll try the nice hot FL sun first....
-- Rob
If you're not in a hurry, you can just set the visors on a flat surface for a week or so (perhaps a little longer in your case due to the deep indentations), and the creases will eventually work themselves out. That's been my experience at least.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)