Looking for pics of the finished area behind the driver's seat showing the fitment of the backpad, carpet and parking brake cables & cover, etc. or the areawithout a seat.
Any help appreciated.
Paul
Put the cover on the ebrake cables, install the back pad, then the carpet. Nothing really overlaps.
At each bottom corner of the backpad there is a "foot" coming down from the pad and turning parallel to the floor. On the driver's side, it is interfering with the park brake cables. Does it go under the cables to sit flush on the floor??
Paul
This should help...
Attached image(s)
The backpad in your picture is missing something (or mine has something extra). Notice the "foot" in my pic right over the park brake cables. That "foot" is missing on your pad.
Does this "foot" go over or under the park brake cables??
Paul
Paul,
Also the carpet goes over the swivel arm for the cables, not under. If I recall there is also a plastic cover that goes over it first, then the carpet.
No 'foot' on mine, but it looks like there would be enough room to slip it 'behind' the cables.
And yes, there is a stamped steel cover that goes over the cables.
Attached image(s)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)