Does anyone know if the '66-'77 911 window cranks will fit the spline of my '76 window regulator? I'm in the home stretch on my interior assembly, and looking at options.
Thanks!
Jim
Thanks. I'll try and pick up a used one, with the cover, and see how she looks.
Jim
UPDATE UPDATE UPDATE!!!!!!
I picked up a pair of the earlier style chrome base type, with the plastic cover. And well, THE SPLINE DIDN'T FIT!!! But the good news is, the screw did!!
So I was able to get it to work. The spline has the correct number of teeth- 12, and the major diameter is correct. It's the minor diameter (the ID over the teeth) that is too small. So I drilled it out. Use a 27/64" drill bit, and drill down to the shoulder at the bottom of the spline. Then use a 7/16" bit and drill about 3/16" down into the spline. Last step- take a tiny triangular file and clean up the burrs covering the splines, and sharpen them while you're at it. Takes a few test fits and more filing, but it'll eventually fit.
I like it. Picture below-
Looks nice! Thanks for the head's up on how to modify them for fit.
Looks good as well! Is there enough left of the splines to last rolling the windows up and down a few times?
The 914 cranks are standard VW bug and can be picked up at a bug shop for about $4 each new.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)