What gage sheet metal do i need for patching holes in the battery area and outer fire wall? Thanks
16ga?...for an M1 Abrahms rebuild perhaps
20ga for inner wheel house
16 is OK for the longitudinal
I used 16 on the inner wheelhouse and long. I'm using 16 on the lower firewall too. Upper firewall, I'm using 18g.
20g on the wheelhouse? I thought the piece I cut out was more like 17g, same for the lower firewall. I know you've welded more of these things than me though.
Don't use galvanized.
German steel was 19 gauge...take your pick of 18 or 20.
Rich
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)