Alright so here is the deal.. I orderd what i thought were the right motor mounts from pelican parts.And what I got were way to small, so can someone give me the correct part number..please
What year? What model? What transmission? /6? /4?
Andy
its a 74 1.8l 914
The 73+ should have solid outboard mounts, which look like pieces of U-channel with holes in them. That is how the outboard ends of the motor mounts attach to the chassis. The rubber mounts go between the middle of the bar and the brackets on the crankcase.
Sounds like you were expecting the big rubber outboard mounts that the early cars use?
--DD
yeah these ones sit on that flat crossmember....
Okay you ordered these:
But were expecting something like this:
Unfortunately, i don't think Pelican sells those anymore. I was looking for a set a few years back and i was only able to get them off a parts car.
I could have a pair at Ventura this Sunday, if prompted .................
The Cap'n
yeah exactly...and sorry for the long turn around time to respond, but yeah im guessing parts car or ebay???
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)